The attached zip file contains the post processor for the SYIL X7 3-axis Vertical Mill with a SYNTEC MA Control. The zip file contains the Syntec g-code programming manual, the Icam Foundation Post Processor, a 3dxml file used to test the post processor and a README FILE. Here is a sample of the g-code output:

O0423

(SYIL X7 SYNTEC 22MA MILL XYZ)
(POST PROCESSOR VER 060325-1)
(POSTED DATE: 06/03/2025 TIME: 3:09:34 PM)

(---------- TOOL LIST -------------)
(T01  1/4" FLAT 3FL)
(T04  1/4" DRILL 135)
(T06  1/2 SPOT DRILL 135 CARBIDE)
(T07  3/8" FLAT 3FL)
(T08  10-32 BOTTOMING TAP)
(T09  #21 DRILL 135 COBALT)

(MACHINE CYCLE TIME: 0:02:07)

G70
G17 G40 G64 G80 G90 G94
G91 G28 Z0
G91 G28 X0 Y0
G90

(SET G54 AT TOP CENTER OF BLOCK)

(FIN ROUND POCKET)
N1 T01 M6
N2 S5000 M3
N3 G64
N4 G00 G54 X.0185 Y.0572
N5 G43 Z1. H1 M8
N6 Z.1
N7 G94 G17 G03 X.0391 Y.0389 Z.085 I-.0216 J-.0451 F20.
N8 X.0469 Y.0124 Z.07 I-.0422 J-.0268
N9 X.0395 Y-.0142 Z.055 I-.05 J-.0003