Hello,
I'm experiencing severe cursor lag in DraftSight and have not been able to resolve it after extensive troubleshooting. I would appreciate your help.
PROBLEM
- As I add lines, objects on different layers and dimensions, the cursor, zooming and panning in the drawing area become heavily laggy.
- Menus, ribbon and the command window stay responsive the whole time.
- On first launch DraftSight reported that my graphics driver is outdated, although the NVIDIA driver is current.
- AutoCAD 2022 and games run smoothly on the same machine.
SYSTEM
- DraftSight version: DraftSight Professional 2026 SP4 x64
- Laptop: Lenovo LOQ 15IAX9
- OS: Windows 11
- CPU: Intel Core i5-12450HX (8 cores / 12 threads)
- GPU: NVIDIA GeForce RTX 4050 Laptop GPU, Studio driver 621.24 (Clean installation)
- Display: single 1920x1080 internal screen
- Mouse: HP 430 wireless (standard office mouse, no extra software)
OBSERVATIONS
- gl_info.txt shows the OpenGL Core profile active on the RTX 4050, but reports "OpenGL ICD: Failed to retrieve ICD."
- While DraftSight is idle, CPU clock is about 3.8-4 GHz. While moving the cursor over a drawing area, the CPU clock drops to about 2.3–2.5 GHz and NVIDIA GPU usage only rises to about 12–16%. One logical processor is noticeably busier than the others, but not at 100%.
- DraftSight memory usage is stable (about 404 MB to 413 MB during a session).
- Working with this lag drains my battery twice as fast as working with Autocad 2022.
- My colleague have the exact same laptop, licenses are bought by the company to both of us at the same time and on his computer everything works fine. Only difference i noticed with the settings, is that his Nvidia drivers are from 2025.
ALREADY TESTED (no fix, unless noted)
- Uninstalled and reinstalled the latest DraftSight from the official website
- OPENGLPROFILE: ANGLE (hardware), ANGLE Software and OpenGL Core
- Windows Graphics settings and NVIDIA Control Panel: DraftSight set to High performance NVIDIA GPU
- Lenovo Vantage: Hybrid Mode off, GPU working mode set to dGPU only
- Windows power mode Best Performance, laptop plugged in, Lenovo Performance mode (If Laptop is plugged in, the performance improves a bit, but not significantly)
- NVIDIA: vertical sync off, Max Frame Rate 60 FPS
- NVIDIA Overlay and Lenovo SmartColor disabled
- ESnap, ETrack, Dynamic Input and AMonitor turned off
- "Use dashed entity selection highlighting" enabled
- Cursor regeneration interval changed
- DPI scaling override set to System
- DraftSight settings folder in %appdata% reset
- Process affinity limited to performance cores (CPU 0–7)
- DraftSight is not in Windows Efficiency mode
What could be the problem here?
Thank you for your help.
Best regards
