About the role

The All Physics Analyst role allows you to:

• Connect established products to 3DEXPERIENCE platform
• Provide connection to multiple disciplines - structures, fluids, electromagnetics, vibro-acoustics and multibody dynamics
• Experience a holistic lifecycle of design, simulation and KPIs
• Fully integrate with design process and data
• Give your decision makers results they can really experience through lightweight visualization

Note: you can use the contents page icon in the top right of the post to jump to the section that you're interested in. 

R2025x FD03

User Experience Value

• Experience a first initial version of 3DEXPERIENCE Simpack Wizard simulation data management for large-scale automated Vehicle Dynamics Workflows through enhancements in connector for Simpack.

R2025x FD02

Functional Value

PowerFLOW:

• Benefit from scenario definition and results analysis for thermal workflows with PowerTHERM on 3DEXPERIENCE Cloud.

• Enable fluid load mapping to structural mesh with PowerEXPORT on 3DEXPERIENCE Cloud.

• Explore interactively the impact of design changes on performance with DesignGUIDE submission on 3DEXPERIENCE Cloud.

• Streamline vehicle thermal analysis by importing materials from assemblies on 3DEXPERIENCE Cloud.

R2025x FD01

User Experience Value

• CST Studio Suite

• Build robust model and improve performance for electromagnetics simulations by accessing new mesh setting for maximum element size for surface mesh, improvements in moving mesh with internal ports and in mesh recovery tools.

• Enable more flexible electromagnetic simulation workflows by accessing multiple CST Studio Suite versions for cloud compute

R2025x GA

Functional Value

• XFlow

• Enable power

User Experience Value

• XFlow

• Enhance Powertrain lubrication analysis by the possibility of saving the values at volumetric frame frequency.

• Reduce the user effort while doing the setup by enabling different time step and frame frequency modes.

• CST Studio Suite

• Perform large-scale network simulations of 3DEXPERIENCE® building and factory models, accelerated by asymptotic solver enhancements.

• Perform highly accurate low-frequency simulations of linear actuator designs on the cloud based on OPERA technology.

• Perform efficient antenna design by accessing seamless synthesis tools as well as fast and accurate electromagnetic solvers from WASP-NET technology

• Simpack

• Dramatically speed up, improve reliability and enable full traceability for finding and assigning Geometrical and Functional Engineering data to Motion models via template based, direct and persistent references to all relevant and required Geometrical and Functional Engineering Data on 3DEXPERIENCE.

R2024x FD03

User Experience Value

• Simpack: Perform faster assessment of E-drive noise and vibration by incorporating structural and electromagnetic reduced order models managed on the 3DEXPERIENCE platform directly in a Simpack E-drive model

• Simulation Manager: Interact more easily with other dashboard applications by dragging and dropping simulations to Simulation Manager.

R2024x FD02

Functional Value

Abaqus: Enhanced licensing flexibility by enabling the use of SimUnits on-cloud to power Abaqus on-premises job runs submitted via Interactive Products.

CST Studio Suite: Perform better prediction of performance for haptics sensors with unified and intuitive sequential simulation (one-way coupled) between electromagnetics and structures coupling best in class physics solutions

PowerFLOW: Accelerate aerodynamics and aeroacoustics evaluation of full vehicle configurations at reduced cost with the multi-GPU PowerFLOW solver

R2024x FD01

Functional Value

• CST Studio Suite: 
  • Explore low frequency simulation results easily with the OPERA results integration into CST Studio Suite.
• Simulation Manager: 
  • Easily access current token utilization by users through the new Simulation Manager token usage reporting functionality

User Experience Value

• Simpack: 
  • Quickly and easily save flexible body information from 3DEXPERIENCE in Simpack by including structural reduced order models in model save through 3DEXPERIENCE connector for Simpack.
• CST Studio Suite:
  • Perform large simulations with High Performance Computing for electromagnetics simulations by adopting Distributed Computing on the 3DEXPERIENCE cloud.
  • Define seamless model creation and simulation scenario by accessing parameter defined in 3DEXPERIENCE.
  • Save time and reduce storage requirements by downloading selected cloud compute simulation results via Power'By.

R2024x GA

Functional Value

PowerFLOW

• Achieve faster throughput for cabin comfort and community noise aeroacoustics workflows by launching PowerACOUSTICS from a dedicated app on 3DEXPERIENCE Cloud
   
• Enable vehicle designs developed in third party software to be evaluated for vehicle performance on 3DEXPERIENCE Cloud
   
• Streamline evaluation of aerothermal performance KPIs for complex vehicle designs with PowerTHERM Power'BY on 3DEXPERIENCE Platform

CST Studio Suite

• Simulate large scale products up to environmental complexity for antenna placement and indoor network design with stronger performance through support of GPU.

Simpack:

• Experience a new level of Motion model result fidelity and Motion simulation process efficiency through enhanced Motion Core solver technology performance and capabilities

Simulate large scale products up to environmental complexity for antenna placement and indoor network design through higher fidelity and acceleration of the Asymptotic Solver (High Frequency Solver).

Indoor network design simulation in CST Studio Suite Connected with Asymptotic Solver (High Frequency Solver).

Streamline evaluation of aerothermal performance KPIs for complex vehicle designs with PowerTHERM Power'BY on 3DEXPERIENCE Platform

Enable vehicle designs developed in third party software to be evaluated for vehicle performance on 3DEXPERIENCE Cloud

R2023x FD04

Functional Value

• Generate aeroacoustics results from PowerFLOW Simulation using PowerACOUSTICS on 3DEXPERIENCE Cloud

User Experience Value

• Streamline aeroacoustics post-processing analysis of PowerFLOW simulations on product design using PowerACOUSTICS on 3DEXPERIENCE Cloud
• Save time and build robust electromagnetics simulation model by enhancing loading of Siemens NX and PTC Creo data from 3DEXPERIENCE via Power’By.

CST Studio Suite: Save time and build robust electromagnetics simulation model by enhancing loading of Siemens NX and PTC Creo data from 3DEXPERIENCE via Power’By.

CST Studio Suite mobile phone electromagnetics simulation model loaded from 3DEXPERIENCE via Power’By.

Generate aeroacoustics results from PowerFLOW Simulation using PowerACOUSTICS on 3DEXPERIENCE Cloud

R2023x FD03

Functional Value

PowerFLOW:

• Efficiently iterate on vehicle geometric design to maximize cabin passenger comfort using PowerACOUSTICS Power'BY
• Automate extraction of vehicle design KPIs from high-fidelity PowerFLOW simulations with the ability to run scripts within PowerFLOW remote sessions on 3DEXPERIENCE Cloud
• Electromagnetics: perform fast and accurate massive electromagnetic simulation for EMC Compliance and Antenna Placement workflows by enabling 3D Hybrid and Electronic Circuit solvers on 3DEXPERIENCE Cloud High Performance Computing.

CST Studio Suite:

• Perform fast and accurate massive electromagnetic simulation for EMC Compliance and Antenna Placement workflows by enabling 3D Hybrid and Electronic Circuit solvers via schematic scenario setup on 3DEX

User Experience Value

• Streamline aeroacoustics post-processing by launching PowerACOUSTICS from the PowerFLOW Connector on 3DEXPERIENCE Platform
• Allow 3DEXPERIENCE Cloud users to run Python scripting within a PowerFLOW remote session

Optimize product design for high quality aeroacoustics performance

Accelerate aircraft engine design by accurately capturing transition to turbulence

CST Studio Suite Cloud Connected schematic view

CST Studio Suite schematic task selection in Simulation Manager

R2023x FD02

Functional Value

• Simulate larger and higher fidelity Abaqus simulations with access to higher memory compute instances to increase solver efficiency and lower turn-around times

R2023x FD01

Functional Value

- Abaqus: Specify the units in which simulation models are built by selecting their unit set in the Simulation Manager Setup Tab to ensure simulation results are displayed with the proper units in 3DEXPERIENCE post processing apps.

Abaqus: Specify the units in which simulation models are built by selecting their unit set in the Simulation Manager Setup Tab to ensure simulation results are displayed with the proper units in 3DEXPERIENCE post processing apps.

User Experience Value

Access additional information about why simulations may be pending when run on cloud (waiting for compute licenses to be available, waiting for dependent simulations to complete or for compute resources to scale).

R2023x GA

Functional Value

CST Studio Suite: Analysis Cases are now displayed in Simulation Manager for Simulation objects created from CST Studio Suite

Abaqus: You can now upload Abaqus sub routine sources so they are compiled on cloud during the simulation

XFlow: Improved filtering via 6WTags that are indexed for analysis cases

PowerFLOW: The following apps should be available in the Compass to run in an interactive session on 3DEXPERIENCE Cloud: PowerINSIGHT, PowerVIZ.

User Experience Value

XFlow: Analysis Cases are now displayed in Simulation Manager for Simulation objects created from XFlow

R2022x FD04

Functional Value

- PowerFLOW and Abaqus: Benefit from increased automation and efficiency with the ability to select multiple simulations and analysis cases to run on cloud in one shot. Choose to run them all in parallel for the fastest turnaround time or run them in sequence to account for dependencies across simulations.

It is now possible to submit Abaqus submodels to run on cloud automatically after global models.

PowerFLOW Coarse and Base analysis cases can now be submitted to run on cloud at the same time.

R2022x FD03

Functional Value

Simpack: You can now monitor Simpack simulations from the Simulation Manager app Monitor tab.

Simpack Compute on Cloud allows to monitor simulation progress in Simulation Manager App.

Electromagnetics Engineer Embedded License Usage Reporting

R2022x FD02

Functional Value

PowerFLOW: You can now build your PowerFLOW simulations meshes and cases in browser, leveraging remote sessions of PowerDELTA/PowerCASE. This enables support for a fully web-based end to end workflow for preparing, running and post processing PowerFLOW simulations on cloud.

PowerFLOW: You can now monitor PowerFLOW simulations from the Simulation Manager app Monitor tab.

CST Studio Suite: Extended Electromagnetics cloud compute offering to support simulations using Low Frequency, Charged Particles Dynamics and Thermal solvers. Moreover, Optimization and Parameter sweep simulations are also supported.

User Experience Value

General: Improved robustness of Simulation Manager app

CST Studio Suite: Access abstraction shapes from 3DEXPERIENCE to perform electromagnetics simulation on de-featured models.

CST Studio Suite: access abstraction shapes from 3DEXPERIENCE to perform electromagnetics simulation on de-featured models.

CST Studio Suite: Extended Electromagnetics cloud compute offering to support simulations using Low Frequency, Charged Particles Dynamics and Thermal solvers. Moreover, Optimization and Parameter sweep simulations are also supported.

R2022x FD01

Functional Value

- PowerFLOW & XFlow: users can now upload files from their local machine to be used in remote sessions.

User Experience Value

- CST Studio Suite: Access Material Data for Electromagnetics Simulation directly on 3DEXPERIENCE - Enhanced stability and performance when loading data from 3DEXPERIENCE for Electromagnetics Simulation

- Simpack: MBS Simulation data (Simpack Wizard Databases, Models and Loadcases as well as Analysis Results) can now be saved to 3DEXPERIENCE. This allows lifecycle management of model data as well as Simpack simulation runs including traceability of analysis results vs. model and loadcase data used.

Access Material Data for Electromagnetics Simulation from 3DEXPERIENCE, removing the need for end users to recreate data in CST Studio Suite

R2022x GA

Functional Value

- CST Studio Suite can directly access Printed Circuit Board (PCB-EDA) data created using common ECAD tools and saved on the 3DEXPERIENCE platform, allowing efficient collaboration.

User Experience Value

- PowerFLOW: Run PowerFLOW simulations on the cloud leveraging the 3DEXPERIENCE Cloud Compute Service. Post process PowerFLOW simulations on the cloud by accessing PowerVIZ and PowerINSIGHT clients from your web browser.

- XFlow: Run XFlow simulations on the cloud leveraging the 3DEXPERIENCE Cloud Compute Service. Post process XFlow simulations on the cloud by accessing the XFlow client from your web browser.

- CST Studio Suite: Adding arrow and streamline plots from CST Studio Suite to SIMULIA Physical Review App for better results sharing and review of electromagnetic fields through collaborative dashboards.

CST Studio Suite can directly access Printed Circuit Board (PCB-EDA) data created using common ECAD tools and saved on the 3DEXPERIENCE platform, allowing efficient collaboration.

Capability to view arrow and streamline plots from CST Studio Suite in SIMULIA Physical Review App for better results sharing and review of electromagnetic fields

Run and post process PowerFLOW simulations on the cloud using Simulation Manager and in browser remote sessions of PowerVIZ and PowerINSIGHT

Explore and compare PowerFLOW results in Dashboards using Physics Simulation Review widgets

Run and post process XFlow simulations on the cloud using Simulation Manager and in browser remote sessions of XFlow