Technical Brief
Purpose and operating principle
Reconstruct the small pump and its demonstration assembly from the supplied drawing and archival photograph. US 1,061,142 describes a shaft driven runner made of parallel, spaced disks. Fluid enters near the shaft, passes into the interdisk spaces, and receives energy through viscous shear from the rotating surfaces. It spirals outward into the peripheral casing and leaves through the discharge passage. The pump therefore converts mechanical shaft input into fluid energy without conventional impeller blades.
Main components to model
Disk runner: flat disks with central inlet openings and connecting spokes, shaft, spacing washers, shoulder and retaining nut. Represent the repeated disks parametrically; keep a continuous inlet path to each gap.
Pump body: volute casing, bolted covers, central inlet connection and peripheral discharge passage. Drive and support: shaft coupling, bearing supports, seals, fasteners and mounting structure. Internal details should follow the patent unless the assembly drawing provides clearer evidence.
Demonstration assembly: tank, upper distribution pipe, return or collection region, control valve, pressure gauge and visible connecting pipes. Reconstruct their external form from the drawing and photograph; concealed connections require explicit assumptions.
Flow path and power transfer
Rotation drags the fluid tangentially between the disks. The swirling flow develops a radial pressure gradient and moves toward the outer casing, where it is collected and discharged. A liquid demonstration can return the discharged flow to a reservoir, but the supplied image alone does not establish every suction connection. Unlike turbine operation, pumping requires external shaft power and normally uses center to periphery flow. Disk diameter, gap, speed, fluid viscosity and system resistance determine performance.
Useful relationships for a liquid model: shaft power Ps = T omega; hydraulic power Ph = rho g Q H; overall efficiency eta = Ph / Ps . Here T is torque, omega angular speed, rho fluid density, Q volume flow and H total head rise. A pressure gauge alone does not establish total head or efficiency; velocity, elevation and shaft input must also be considered.
Suggested simulation sequence
First build the complete CAD assembly, section view and exploded view; check disk gaps, shaft alignment and the inlet to outlet passage.
For optional CFD, begin with a declared liquid such as water and model the fluid domain, rotating disk walls, casing and inlet or outlet conditions. Resolve the narrow gaps with a suitable mesh and check convergence.
Calculate flow, pressure rise and torque at stated speeds; vary system resistance to obtain a pump curve. Include a free surface model only if investigating the visible discharge into the tank.
Distinguish illustrative animation from calculated results.
Sources and reconstruction limits
US 1,061,142, Fluid Propulsion (6 May 1913), establishes the disk pump principle and representative construction. The supplied Assembly Drawing of Tesla Pump and photograph MA006-03-046A document the demonstration layout. Book pages 231 and 234 provide historical context, not measured ratings for this unit. Exact disk count, spacing, thickness, materials, speed and operating pressure are not reliably established by the supplied images. Use legible drawing dimensions where possible and label all remaining design choices as estimates or assumptions.
Historical Sources
Visual References
Disclaimer: The documentation provided by the Nikola Tesla Museum is intended exclusively for registered participants in the Open Tesla Challenge, for use within the competition. It may not be redistributed, published, or used for other purposes without the Museum’s prior written consent.
