Technical Brief
Purpose and operating principle
Model an early two phase induction motor using the supplied archival image and patent drawings. Two independent stator circuits, displaced in space and supplied with phase displaced alternating currents, produce a rotating magnetic field. This changing field induces currents in closed rotor circuits. Their interaction with the stator field generates torque and converts electrical input into shaft power, without a rotor commutator.
Ideal two phase supply:
I A = Im cos(2 pi f t), I B = Im sin(2 pi f t). For a two pole model, place the magnetic axes 90 degrees apart and connect opposite stator coil regions with cooperating polarity. Equal sinusoidal components produce an ideally constant magnitude rotating resultant; actual flux depends on core geometry and the air gap.
Main components to model
Stator: laminated annular iron core, insulated coil groups, coil supports and four supply terminals.
Rotor: magnetic core on a shaft, with two perpendicular, electrically independent closed winding circuits as a historical induction configuration. Do not substitute a modern squirrel cage without identifying it as an alternative.
Mechanical assembly: shaft, bearing supports, visible cross braces, fasteners and base. Use the archival image for external proportions; use patent sections to interpret concealed components. Maintain a noncontact radial air gap and adequate winding clearance.
Speed and slip
The synchronous field speed is ns = 120 f / P rpm, where f is supply frequency in hertz and P is the number of magnetic poles. Slip is s = (ns - n r ) / ns . In normal induction motoring, the rotor runs below field speed so relative motion continues to induce rotor currents and torque. For example, a two pole model at an assumed 50 Hz has a field speed of 3000 rpm; this is not a documented rating of the pictured machine.
Suggested simulation sequence
First build a parametric assembly and verify clearances and free shaft rotation.
Next animate the rotating field and rotor separately as an explanatory visualization. For calculated performance, use a suitable transient electromagnetic solver with conductive rotor circuits and motion; examine flux, induced currents, torque and speed under a declared load.
Specify winding turns, circuit resistance, material properties, excitation, inertia and losses. A prescribed speed animation alone does not validate induction torque.
Sources and reconstruction limits
US 381,968 (1 May 1888) describes several rotating field motor forms; select one configuration consistently. US 390,721 (9 October 1888), Dynamo Electric Machine, chiefly concerns the supplying generator system and also describes a motor with closed rotor coils. The six supplied IEEE Power and Energy Magazine pages (January/February 2022, pp. 93–98) provide context. Image MA006-01-061A bears the marking MNT, VI / I, 61. The supplied material does not establish the pictured unit’s internal winding details or absolute dimensions. Label inferred construction and all chosen dimensions and operating parameters as assumptions.
Historical Sources
Visual References
Disclaimer: The documentation provided by the Nikola Tesla Museum is intended exclusively for registered participants in the Open Tesla Challenge, for use within the competition. It may not be redistributed, published, or used for other purposes without the Museum’s prior written consent.
