This Post Processor is for generic XYZ Vertical Mills that utilize the Mach3 Control. Here is a sample of the output ISO g-code:

(MACH3 MILL XYZ)​​​​​​​
(POST VERSION: 081723-1)
 
(T1  D=0.5 TAPER=135.DEG - 1/2 SPOT DRILL 135)
(T2  D=0.25 TAPER=135.DEG - 1/4 DRILL 135 COBALT)
(T3  D=0.625 TAPER=135.DEG - 5/8 DRILL 135 COBALT)
(T4  D=0.3125 TAPER=135.DEG - 5/16 DRILL 135 COBALT)
(T5  D=0.5 TAPER=135.DEG - 1/2 DRILL 135 COBALT)
(T6  D=0.4375 TAPER=135.DEG - 7/16 DRILL 135 COBALT)
(T7  D=0.5 TAPER=0.DEG - 1/2 REAMER 10FL .4355 STRAIGHT SHANK)
(T9  D=0.635 TAPER=0.DEG - .635 Boring Bar)
 
(TOTAL MACHINING TIME = 0:07:40)
 
G17 G20 G40 G49 G64 G80 G90 G94
G28 G91 Z0.
G90
 
(G82 DRILL WITH DELAY 5 PLCS.)
N100 T1 M6 (1/2 SPOT DRILL 135)
N101 S2750 M3
N102 G54 G0 X1.8211 Y2.3723
N103 G43 Z1. H1 M08
N104 Z.1
N105 G17 G99 G82 Z-.0777 R.1 P1. F8.
N106 Y.5755
N107 X3.5709 Y1.8013
N108 X4.6638
N109 X5.7104
N110 G80 Z1.
N111 M9
N112 M5
N113 G91 G28 Z0.
N114 G90 G49

​​​​​​​