use of plywood as material?

We are in thought of trying CosmosExpress to do some analysison some parts of ours. Is it possible to use plywood as a material?If so what settings/information do I use?

A piece we desire to try is 4 inches tall by 57 inches long by .75inch thick, with 3 cutouts in it for electric.SolidworksSimulation
Answers 5
JM
JM 2008-11-20 Best Answer
You'll need to find the material properties for the plywoodand manually input them.
SF
SF 2008-11-20
I am not sure if you can input new materials intoCOSMOSXpress. Also, I do not believe that plywood is an isotropicmaterial so depending on what you are trying to do it might requirenon-linear analysis, with COSMOS Advanced Professional.
SF
SF 2008-11-20
Hi guys, there have been several postings on usingnon-library materials with SimulationXpress (formerlyCOSMOSXpress). The easiest way is to assign the material in SWbefore you fire up SimX and it should be there for you when youcreate the SimX study.

This and other tips are available thru the free online trainingwe've developed at:

www.SimulationXpress.com

As far as plywood goes, gross elastic properties for stiffnesscalculations are straightforward and probably available thruGoogle. Failure prediction in plywood is tougher and may involveorthotropic quantities. I'd do some research on this material andcorrelate some simple cases with test before making any criticaldecisions from the simulation data.

Good luck!!!

Vince
SF
SF 2008-11-21
Good to know.

Thank you.

I have been able to find certain information for materialproperties but not EOM.
SF
SF 2012-03-02

can you please share the material proeprties of plywood?

thanks