What determines when the "up to next" option is avalible for an extrude. Some times it is there, and sometimes not.
SolidworksParts And Features
What determines when the "up to next" option is avalible for an extrude. Some times it is there, and sometimes not.
SolidworksParts And Features
I believe separate bodies must be present. So if you are making a part where everything is merged into one body it will not allow you to extrude up to next since it is all the same body. Hopefully someone will correct me if I am wrong or not giving a good explanation.
Ryan W.
I've never had it missing (that I can recall).
What feature does this happen on?
it was an extrude boss feature. It was there, then I changed the postion of the sketch and then it was gone.
Until unless you have something to which you can extrude, you'll not see this option.
Will the projection of that sketch intersect the body?
If you are extruding into space away from the part you are building on it will not show, however if you reverse the direction of the extrude toward the existing solid then it will show.
Regards,
I agree with Brian,
The only other thing is I think there has to be a surface which completely incapslates
the sketch which is being protruded to.
sometimes you need to select "up to body" instead of "up to next". "up to body" almost always works (if there is a body there).
if your extrude direction is facing the solid portion of the model it wakes up if no solid is behind the sketch plane there is no up to next. simple
This was exactly what was happening with mine. It would be nice if they marked this as the correct answer rather than the reply
^^^^^^^ this.
it can't go up to next if there isn't a "next" to extrude up to.
you can do up to next in a single body part. you don't need multi body.
You can do it within a single body.