I have a bend table that i received straight from Trumpf which our TruBend 3066 uses to get our developed sizes from,
i would like to import this into Solidworks 2013 but i do not know what bend table to use? also i think Trumpf has gave me a few more sizes which i do not know why?
i have attached below a few rows in my spreadsheet from Trump.
has anyone here done this before or worked with Trumpf?
| AKF_MATERIAL_NAME | AKF_WS_INDEX | AKF_MATERIAL_DICKE | AKF_OW_GRUPPE | AKF_MA_GRUPPE | AKF_VERFAHREN | AKF_WINKEL | AKF_RADIUS | AKF_FAKTOR_KAN | AKF_FAKTOR_TAN | AKF_FAKTOR | AKF_FERTIGUNGSFLAG | AKF_ERSTELLUNG | AKF_KORREKTUR_RADIUS | AKF_KORREKTUR_FAKTOR | AKF_MIN_DICKE | AKF_MAX_DICKE |
| 1.0038 | 20001 | 0.5 | OWR0.5 | EVG04W30 | 0 | 180 | 0.05 | 0.011 | -7.018 | 0.011 | 4 | 2 | 0 | 0 | 0.4 | 0.6 |
| 1.0038 | 20001 | 0.5 | OWR0.5 | EVG04W30 | 1 | 180 | 0.25 | 0.011 | -7.018 | 0.011 | 4 | 2 | 0 | 0 | 0.4 | 0.6 |
| 1.0038 | 20001 | 0.5 | OWR0.5 | EVG04W30 | 2 | 30 | 0.5 | 0.011 | -7.018 | 0.011 | 4 | 2 | 0 | 0 | 0.4 | 0.6 |
| 1.0038 | 20001 | 0.5 | OWR0.5 | EVG04W30 | 2 | 30.38 | 0.5 | 0.004 | -6.943 | 0.004 | 4 | 2 | 0 | 0 | 0.4 | 0.6 |
| 1.0038 | 20001 | 0.5 | OWR0.5 | EVG04W30 | 2 | 32.4 | 0.5 | -0.024 | -6.375 | -0.024 | 4 | 2 | 0 | 0 | 0.4 | 0.6 |
| 1.0038 | 20001 | 0.5 | OWR0.5 | EVG04W30 | 2 | 35.6 | 0.5 | -0.074 | -5.526 | -0.074 | 4 | 2 | 0 | 0 | 0.4 | 0.6 |
