SWX2018 slow down

Hi all,

We have recently moved to Solidworks 2018 sp0.1 from Solidworks 2016 and have since noticed a significant slowdown in overall performance, especially when switching between models and drawings and also whilst working with the models in section view.

Our machines are IC3D i7 3.30 GHz workstations - 32GB ram running 64bit windows 7 Pro which should be OK for what we are using Solidworks for.

The installation was a clean install.

We have only noticed the slow down since the upgrade to SWX2018 last week so i am confident in saying this is a SWX related issue and not a hardware problem.

Just wondering if any one has noticed a similar slow down and if there were any suggestions as to what may be causing the laggy performance?

Thanks for any suggestions

SolidworksGeneral
Answers 7
JS
JS 2017-10-31 Best Answer

No lag here...

DP
DP 2017-10-31

Different version of Solidworks sometimes have different video card driver requirements.   I would still check to make sure that you have the latest approved and tested driver for your video card using http://www.solidworks.com/pages/services/VideoCardTesting.html

BD
BD 2017-11-01

Thanks Dan,

This was a helpful suggestion and link.

I have found that our video cards pass all tests (Nvidia Quadro K4200) however, the graphics driver required an update which was initially unnoticed due to the IT protocol in place restricting some system monitoring features.

Driver is now updated, and I will report back after some time spent using the system.

Thanks

CC
CC 2017-11-01

Ben,

did you migrate all the files saved in 2016 to the current release?

BD
BD 2017-11-01

Hi Christian,

This was not done as a 'Batch' process, we are converting as and when we continue work on projects.

Could this be problematic? this method worked for us without problem when upgrading from SWX2014 - SWX2016

We are implementing PDM in December, so i imagine this will help version control and access efficiency. 

Thanks for your help

SF
SF 2017-11-02

I'm running some mechanical simulation based on 2016 files on 2018 SP0.1, simulation startup and save time increased a lot (1 out 4 cores at 100% for minutes...).

PM
PM 2018-05-23

Yes, definitely witnessed a slow down here too. Moved from 2017 SP3.0 to 2018 SP2.0.

Our machines ran 2017 fine, 2018 is definitely slower spinning a model around, zooming in and out, also mating and switching between models.

We have custom machines, all 4 users experience same performance issues, same machines.

i7 4790K @ 4.00 GHz

32gb ram

Nvidia Quadro K4200

Windows 7 professional

I originally thought it was video card driver related. Have tried several drivers for our K4200's to no avail.

We have tried the Solidworks RX recommended driver, the Windows 7 device manager update driver wizard, and the latest driver from the Nvidia website.

Currently running driver version 23.21.13.9158, dated 30-Apr-18.

Performance is pretty average.

, what driver version are you running?