Surfacing

Surfacing - I have a customer who provides me surfaces from his CAM software. He is not the most diligent about providing good clean surfaces and I am not very good with adding surfaces. He sent me a file that is missing a blend radius, I need to add this radius prior to mirroring and stitching  to create a surface body. Can anyone help me out on this one?

SolidworksSurfacing
Answers 12
IM
IM 2015-03-23 Best Answer

Is this something you are after ?

PS
PS 2015-03-23

Chris,... I dissected it and there is enough info from the surfaces and the 3D curves (overlay).. and you can extract or resolve a knit from the data.

btw..what most likely happened with this blend?

The default import has knitting turned on. (heal gaps)

The surfaces were most likely truncated or consumed

because the tolerances from the other modeler are different

and the default trim forced the trim/knit as best it could to heal the gaps.

Try importing without knitting,.. you should see the surfaces and gaps.

(atttached url)  Dropbox - SAMPLE_1-zxys.zip

IM
IM 2015-03-23

Paul,

can you please attach it to the post, see here

PS
PS 2015-03-23

Thanks Ingvar....  although, I prefer putting the data on dropbox. 

IM
IM 2015-03-23

Just, thinking about future reference, since people are learning a lot from this forum. They can not see your file, after you have deleted it from your dropbox.

Your approach was really good , to dissect the files first since the surface was bad to start with and maybe after you saw what I tossed in with a question to Chris. Of course the surface is not perfect either in other areas Chris did not mention. But in the end it is all about the needs.

I just took a dive in and started to making what Chris asked for not thinking about what he was going to do with this. Then I took a closer look at the geometry and realized the imported geometry was not so good he had handed out, that´s why I asked him.

CW
CW 2015-04-01

Thanks Guys, I ended up extracting some of his wireframe and then creating a new surface body. Here is the next question for you, Once I have a surface body, What do I do to use this surface body to cut a solid body?

CW
CW 2015-04-01

Here is the surface body link.

Dropbox - Solidworks_questions

IM
IM 2015-04-01

"Cut with surface" command on the surface toolbar.

IM
IM 2015-04-01

Can you be more specific on what you want to do ?

CW
CW 2015-04-01

Ingvar,

I thought that cus with surface was to cut a solid with one surface not a group or knitted surfaces.

CW
CW 2015-04-01

Nevermind, use thicken and create a solid then cavity. Thank you for your answers.

CW
CW 2015-04-01

Hmm, I am going to have to look closer at that. Thanks Ingvar.