I'm running CFD on a microfluidics device that I've created, but continually get "Solver ABNORMALLY TERMINATED" during the mesh generation phase. I believe this is due to a lack of memory in the computer. There are hundreds of very small, branching channels, and I just can't get it to work. I've been trying different methods for weeks. Is there any way to open up more space on the computer? Since there are so many channels, am I going to need a computer with massive amounts of RAM to compute it? Any advice would be appreciated.
I've attached the model below. Despite what it seems, it IS a 3D shell, it's just extremely thin (0.1 mm).
SolidworksSimulation
Hi Bryant,
Nearly 5,000,000 cells!! I trust that you can achieve a grid independent solution with way lower amount of cells. Thereafter, you do not need a monster machine to solve your case. Please find a grid Independent solution rather than going by huge unnecessary amount of cells.
As a side not, as long as you do not have any heat transfer application considering conduction through walls (which they are adiabatic walls in your case), no matter if the wall thickness is 0.1 mm or 1km, since you are studying a confined flow (internal).
- Siavash
If you don't mind me asking, what do you mean by "a grid independent solution"? I'm new to CFD in general, so I just left all the meshing at default, and am not entirely sure what to change in order to achieve that.
The following article is helpful:
Computational Fluid Dynamics (CFD) Blog - LEAP Australia & New Zealand | Tips & Tricks: Convergence and Mesh Independe…
I got it to work out. Thank you very much!
where we can see those graphs
I'm doing a simple simulation (4,170 cells) and I have 64gb of ram, along with 32 logical processors, and I still am getting this error