Simple 360

This is not a motion study, just a dumb animation. I need to create a simple 360 degree camera rotation around a desk. I have a sled constrained to a circular sketch and then a camera mounted to the sled. So, the sled is supposed to follow the circular path back to the starting point or close to it. I cannot get the sled to turn the 360 degrees, meaning, when I drag the time line where I want it and then reposition the sled say 359 degrees and then hit play nothing happens. I must be missing something?

-Bill

SolidworksMotion Studies
Answers 7
SO
SO 2012-03-29 Best Answer

It's actually moving... 1 degree. If I'm not mistaken, SolidWorks doesn't like when you cross over 180 degrees. Or better yet, it moves objects shortest path. So, by you moving your sled to 359, you actually moved it 1 by shortest path. Try moving it to 179 and it will travel half way across.

I know there's another method to doing this because I've done it, but I'm drawing a big huge blank right now.

Try two move operations. Or four 90s.

WD
WD 2012-03-29

Steve,

Thanks for that...it's a start. how do you increment it by 90?

SO
SO 2012-03-29

If the sled is mated to path, then just move it along the path. It's hard to say without knowing more about your assembly.

In the animation, just move your timeline bar to where you want it, then drag your sled around the path. Just don't go past 180.

RR
RR 2012-03-29

Hi Bill,

Even easier....you can use the Motion wizard to create a turntable animation.  The wizard button is on the Motion bar just above the timeline.  You chhose the rotation and duration and that's it.  Super simple.

If you really want the camera to go around your desk then get rid of the sled and attach the camera to the path sketch.  You can do this in the camera property manager "set camera" and select the sketch.  Once you attach it you are give a percentage slider.  Set a key frame a 0 seconds and 0 percent and another key frame at 100 percent and 10 seconds or however long you want the rotate to happen.

SO
SO 2012-03-29

Thanks Rob. I was hoping you'd jump in. My way is old school I see and I need to learn a little.

WD
WD 2012-03-29

Rob,

Long time no see! THANK YOU!! I feel like a real idiot! I do motion anlysis all the time but can't rotate a camera around a "desk". Rob you Rock!!

-Bill

RR
RR 2012-03-30

Hi Bill,

Glad I could help out   Hope things are going well in RI.