sheet metal set up

HI All

I am new to solidworks ( we are use 2011 sp 3, straight out of box ), with little to nil training ( don't ask why ), but have been using 3d cad for 12 years. I would like to setup the sheet metal side of solidworks to suit our business,

I have asked some people at other sites within the business, but they don't know. as sheet metal is not their main work.

Our work is about 95% thin sheet metal 0.5 to 1 mm... Would like setup it up so it automaticly goes to bend allowance at 90 deg, at 0.8mm inside radius ( our std )  and the developed length is 1.6mm.  how can i do this, for different thickness materials,  I am happy to let it use K factor for non 90 deg bends

Many Thanks

Don

Also are there shortcuts in 2d sketch mode, as it seam a lot more convoluted than what I have been using, or lack of understanding with a lack of raining issue ?

SolidworksSheet Metal
Answers 3
SF
SF 2012-06-01 Best Answer

Sorry  I forget to say the the developed length is very important as the output from solidworks is a dxf file which goes directly to the NC programmer,  and do not modify , and geomery is tooled off  for our punch press machines

Cheers Don

BH
BH 2012-06-01

Setup a part template (prtdot) with your standard sheetmetal parameters, preferably with a  bend allowance table.

Not sure what you mean my shortcuts in 2D mode but try hitting the S key, it will bring up a range of tools. Also you can use mouse gestures with the right mouse button/drag.

SF
SF 2012-06-01

Don,

SolidWorks is not a particularly good 2D package. Sketches are seen as a necessary evil to get you to the solid model, not as things of beauty in their own right.

You will probably have to learn new best practices that are different than the way it worked in your previous software. Work your way through the tutorials. Keep an open mind. Try and talk your boss into the SolidProfessor or similar material, since that won't take you away from the job for days at a time and is (or at least was) substantially cheaper than a course through your VAR.

Jerry Steiger

PS. And spend time in the Sketch and Drawings and Detailing forums.