Sheet-Metal Edge Flange

Iam looking for some help with sheet-metal edge flange.
Iam trying to create a sheet-metal edge flange with this part assketched i do not know how to create this flange detail.
Do i need to use the tab function i have tryed but cant get this towork
here is a screen shot
SolidworksSheet Metal
Answers 5
SF
SF 2009-05-09 Best Answer
just use edge flange. delete some lines and draw a triangle,that is it.
KL
KL 2009-05-09
After selecting the direction of the Edge Flange, selectEdit Flange Profile and modify the sketch to suit. Externaland internal profiles can be added at this stage.
SF
SF 2009-05-09
The only way i could get this to work is using edge flange.
I had to make edge flange allot larger than i need then sketch outthe profile then exrude cut.
Kelvin i tryed your way first time all i got was error messagessaying it could not be done .
Thanks for your help guys
SF
SF 2009-05-09
Brian,

It is possible to create the edge flange in a single operation. Ithink the problem you were having was because the triangular sketchthat you created did not start and end on the edge you werecreating the edge flange on (it's a bit difficult to see in thescreenshot). I have attached an example that might help.

Anthony.
SF
SF 2009-05-09
Here is the flashing iam trying to create i think i got thehang of it now.
Basicaly i have various sizes of these to do and iam trying to findthe easy way to do it all that changes is the overall width of thepart the depth of the flashing and the flange sizes stay the same.
So iam hoping i can use one model as a template for all the othersand just change the overall width for the rest.
Is the way i have done this the best way or is there an easyer way?
thanks in advance