Our shop when making cones adds break lines into the flat pattern. Someone marks points, connects them with a scribe line and the break press operator hits the bends forming it. It has been mentioned several times to ask if solidworks could add these break lines in. To my knowledge there is no method that does this, but sometimes a cool new hidden feature is there that I am unaware of that solves unique issues. Can someone verify to me one way or the other?
SolidworksParts And Features
If you use lofted bends with the bent option you will get the bend lines in the flat pattern. You can set the number of bends as you see fit.
Edit: Or you can use the formed option and get a cleaner look and specify the number of bends.
Thank you! I honestly have not messed around a lot with lofted bends and had no idea of the functionality.
I'm thinking you probably would want to use the formed option as shown in my edit. Especially if you are going to cut this out in a laser so you will have smooth curves on the periphery. The lofted sheet metal tool is fairly powerful and very accurate. Initially I wasn't sure about it's accuracy so I would double check it by doing it the old fashioned way. Lot's of calculations. But I have learned to trust it.