Hello Everyone,
I am new to CAD and trying to create an inclined reference plane.
Have an attached part file.
I want to make a reference plane that is inclined just like face of the Cut-Extrude 1 in the attached part file.
Thank you for taking the time to help
SolidworksParts And Features
I can't open your file (future version), so a couple of screen shots would work great here.
However, There are a few different ways to create angled reference planes.
See the attached video (there are more ways as well):
Select the face and insert, reference geometry, plane. Input distance. Change direction if needed.
Just select the face as was said make sure if you want the face to be the reference you have no offset selected.
Welcome to learning CAD, Ismail.
You can add additional definitions to a reference plane, if you don't want it coincident to the face you're referencing. I mention this because you asked for "a reference plane that is inclined just like face of the Cut-Extrude". For example, you can select the face as first reference, set it to parallel, and select origin point (or any other point or parallel line) for 2nd reference. It's as flexible as you need it.
Also note that by selecting the face as a reference, if that face goes away in a later feature, then it can break the reference plane feature, possibly perpetuating errors. I often make a plane which is set to a specific angle derived from measurements, to mimic without reference. On the other hand, keeping it referential will update the plane with the position of the face, if it moves. Knowing between these can help you keep it either adaptive or manually updated, as you desire for your purposes.