I'm wondering if anyone have seen this strange behavior in Solidworks 2017 print dialog box, where most of the buttons do not work when clicked.
Buttons that do nothing when clicked:
Properties
Preview
Header/footer
Line Thickness
Margins
Close
Help
3D printing
Buttons that work:
Page Setup -
OK
Pressing the ESC key or clicking on the "X" is equivalent to clicking OK - and prints the drawing...
I'm baffled.
SolidworksDrawings And Detailing
Are you printing the drawing or the model. In Model some of my buttons are grayed out.
I'm printing drawings. This behavior happen on any drawing I try to print.
And one more thing of interest: this behavior does not appear when I print the same drawings on another workstation.
Boby,
I've also seen this on some of our workstations. Does your PC have 'Microsoft Print to PDF' in the printers list? I've found that removing it from the PC fixes this issue.
Just checked on mine and all seems fine from the drawing. But like I said in the model Lines was grayed out.
Andrew, thanks for the suggestion!
Unfortunately, I just tried it, didn't work. Teh MS Print to PDF feature was removed using two different ways, and still the dialog buttons do not work.
Will say I do not have that on mine. Also is print not linked to the computer, Solidworks uses how that machine is set up. Maybe the drivers are not current.
I have the same issue and have tried removing the 'Microsoft print to PDF' with no change in behavior. My local VAR suggested updating my graphics driver (which I did), but it had no effect. Would be great to get this fixed!
Has anyone found a solution to this? This problem occurred trying to print to my plotter. It's not activating the HP printer utility like it used to. I have no control over scale or rotation. Suspecting the plotter, I updated its firmware, uninstalled and reinstalled its drivers, etc. Somehow in doing all that I've now screwed up the my 11 x 17 printer too. I went back and printed a drawing that I had saved as a .pdf and it printed fine with Adobe. It's definitely something to do with SW2017. I'm down to an 8-1/2 x 11 printer, somebody please help!!
Only solution I have found is to remove the Microsoft print to PDF printer. If you cannot, then I have found by opening the drawing on a Windows 7 computer, I can reset the what printer the document is looking at and then I can then make it work on my Windows 10 computer. Worst case scenario, you may need to rebuild your SolidWorks registry and make sure your default printer is not the Microsoft one.
Thanks for the suggestions. I had already removed the Microsoft PDF printer per someone else's comment. I did a registry reset with no luck. Unfortunately I do not have any Windows 7 workstations left. Thanks again!
Send the drawing to your VAR?
I have this exact same problem, and I've already tried a couple fixes. First, I uninstalled the printer "Microsoft Print to PDF", and it didn't fix it. I then uninstalled the "Microsoft Print to PDF", still no luck. I just finished doing a complete registry reset on SW, and I still have the problem. Is the next step a complete reinstall?
Gabriel - I never found a total solution to this. What I did find is after doing the registry reset by renaming the it with the "old" addition and restarting Solidworks, I then deleted the new registry file created and renamed the old one back to what it was. I at least got partial functionality back.
Boby,
A client of mine just experienced this "exact" issue on one of their machines. The Microsoft Print to PDF was installed via Windows Update and even had it on my laptop. I took my laptop onsite to try to print this drawing and I experienced the issue you described. So I deleted my "Microsoft Print to PDF" driver and the issue went away. Their IT department is removing theirs as well so we will see if that resolves the issue. I did not have to do anything with my registry but here is my system configuration.
Hope this helps,
Tim CEPA
Believe in The Q!
Tim,
Uninstalling Microsoft Print to PDF does not work for all users. Resetting the registry may not work either since printer information is stored inside the drawing. One way I fixed it was to open the drawing on a computer running Win7. Since that driver is not installed, the drawing resets itself and once again allows the users to print properly.
Thanks for the info Solid Air. My client is experiencing this issue and no way to print the drawing after the Microsoft Print to PDF driver has been used. They also don't have any more boxes running Win7 either. What a cluster!
Tim CEPA
Believe in The Q!