Can anyone help me, if I go to Final Render or Preview Window, the PhotoView 360 window opens and stays for a second and then closes. No files are saved, no picture in the screen and no errors. When I run Integrated Preview, a white box appears where the part was.
I am running SW 2012 SP1.0
SolidworksApi macros
Hi Jeremy,
If you have SWX 2011 try to open photoview 360 in the same. If not then confirm me that which graphics card you are using and the system details. You can also check the details from the RX.
Regards,
Arvind kumar
I Tried to open PhotoView 360 in SWX 2011 and the same thing.
I am running nvidia Quadpro 400 on a Dell Optiplex 780 with Windows XP in 32 bit mode
System Manufacturer:
Other (not a known system vendor)
System Model:
Other
Card Manufacturer:
NVIDIA Corporation
Card Model:
Quadro 400/PCI/SSE2
Your Current Driver:
Diagnostic Results:
There is no information on your configuration in our database. If you are experiencing issues with your system, you may want to visit the website to find recommended cards and drivers.
Card/driver combination information can be found at: http://www.solidworks.com/pages/services/VideoCardTesting.html
You are using a currently supported operating system.
The system environmental variable named TEMP has been set.
Write access is set for the TEMP directory.
System TEMP directory: 90.5 GB
The SolidWorks Backup Directory has been set.
Write access is set for the SolidWorks Backup directory.
SolidWorks Backup directory: 90.5 GB
The SolidWorks Journal file directory has been set.
Drive C:\: 90.5 GB of free space
Drive Q:\: 0 bytes of free space
Total System Memory - 1.96 GB
This amount of RAM is acceptable for assemblies with greater than 2500 components and parts greater than 1000 features.
The total amount of RAM required is based on the size of the dataset used and other open applications.
Free System Memory - 765 MB
You should have sufficient free physical RAM to run SolidWorks effectively. If you exceed the physical RAM, your system performance will be seriously degraded.
Could not open the service pack database, the server may be busy, please try again later.
A process sldworks.exe is currently running, if a SolidWorks session is not active; kill this process using the Task Manager.
Toolbox is loaded on a local drive. This may not be an appropriate location if the toolbox parts are shared. See the Installation Guides at http://www.solidworks.com/pages/services/ServicePacks.html for more information.
I am thinking you may be resource constrained. Do you really only have 2 gigs of RAM in your system? I suspect your system is just crashing from not having enough RAM.
Get another 2 gigs of RAM.
What cpu do you have in your system? Specific model number is important.
What else do you have open, along with SolidWorks, when you try to render?
That is a very low end system to be doing rendering on. Rendering really needs some horsepower to work well. A fast cpu, with a lot of cores and a good amount of memory are important for PV360.
Cheers,
Anna
When I first noticed my rendering was not working I got a new graphics card that was supported with SW 2012 and now I have just changed out my ram for 8 gig. (only 4gig is used with windows XP).
I have nothing else open other than SW 2012.
I installed and ran SW 2012 on my old home computer with 512M of ram and it rendered fine, SW was running a bit slow though (what do you expect)
Could there be a restriction set on my work computer that does not let me run PotoView 360 correctly?
Thanks
Jeremy
Jeremy,
I am stumped at what the issue could be.
What virus protection are you running on the work computer? Can you disable it.
Have you tried doing a repair install of SW2012?
I would call your reseller and have them help you out.
Cheers,
Anna
I ended up upgrading form Windows XP 32 bit to Windows 7 64 bit and now PhotoView 360 works fine. Thanks for all your input.
Jeremy
I have exactly the same problem on 2013 SP0.0, Windows 8, i7, 8GB RAM, Nvidia GT640M.
As soon as I click 'Preview Window' it flashes up for a fraction of a second and disappears again.
Anyone got any ideas?
I am having the same issue. I have uninstalled solidworks, reinstalled it, ran the repair, contacted my reseller and NOTHING has changed. It still flickers. My system is as follows
3DBOXX W-4920
intek core i7-3960X CPU @ 3.30 GHz
16 g ram
win 7, 64 bit
ESET anti virus
Nvidia Quadro 4000
My coworker has the exact same machine, same anti virus, and his works fine
I had driver Nvidia driver 9.18.13.1407 in (so does the other machine) and was told to get the certified one so I did, 8.17.12.9670 and still, NOTHING. I am in the middle of a job where I need this to be working. ANY suggestions?
I am having the same issue as well. Mine has actually worked flawlessly untill today. I click Preview in the render tab and it flashes on the screen and disappears. Why all of the sudden I don't know but I updated my video card driver and it hasn't done anything.
***UPDATE***
I just installed the latest Service Pack for 2013, SP4, and now photoview 360 works again.
Install Bonjour. I'll solve this problem.
I still have this problem.
Unfortunately I do not have a current subscription, so cannot update to SP4.
I've looked into the suggestion below about installing Bonjour, but it seems that this is for networked multi-seat installations - I only have a single-seat license.
I've tried repairing the installation, and updating the graphics card drivers, still nothing. I've also tried playing around with the NVIDIA Optimus settings, which made no difference.
Anyone got any ideas at all?
Balazs,
It looks like Bonjour is only for multi-user networked installations. I have a standalone license, so I don't think this Bonjour thing is what I need.
Any thoughts?
Thank you Balazs,
I was sceptical but thought worth to try, installed Bonjour and it works.
Check to see that the "Bonjour" Service is running. If it is not installed you can download from apple website. Modifying the SW install will re-install this service but a repair will not.
Hope that saves someone some time.
im having this issue also. i tried rolling back drivers in case something got updated that should not have, but that didnt help. i guess ill wait til 2016 to complain to VAR about it....
You are using a currently supported operating system.
The system environmental variable named TEMP has been set.
Write access is set for the TEMP directory.
System TEMP directory: 237 GB
The SOLIDWORKS Backup Directory has been set.
Write access is set for the SOLIDWORKS Backup directory.
SOLIDWORKS Backup directory: 237 GB
The SOLIDWORKS Journal file directory has been set.
Drive C:\: 237 GB of free space
Drive E:\: 1.95 GB of free space
Drive G:\: 3.15 GB of free space
This amount of RAM is acceptable for assemblies with greater than 2500 components and parts greater than 1000 features.
The total amount of RAM required is based on the size of the dataset used and other open applications.
You should have sufficient free physical RAM to run SOLIDWORKS effectively. If you exceed the physical RAM, your system performance will be seriously degraded.
Could not open the service pack database, the server may be busy, please try again later.
A process sldworks.exe is currently running, if a SOLIDWORKS session is not active; kill this process using the Task Manager.
Toolbox is loaded on a local drive. This may not be an appropriate location if the toolbox parts are shared. See the Installation Guides at http://www.solidworks.com/pages/services/ServicePacks.html for more information.
hmmm... just tried the bonjour thing.... it worked for me too... wierd...
i started looking into bonjour after my first post, because i could of swore i already had it installed, but i didnt. after i installed, without even restarting solidworks, i tried to render and viola, it works. thanks for the tip.