Part reference

Hi!

I would like to make a reference table in my drawings. Reference table would have list of assemblies in which given part is used.

Example:

"Part A" - common part used in 3 different assemblies.

"A1, A2, A3" - assemblies which contain "Part A"

Reference table would show in which assemblies Part A is used. If there will be new assembly A4 created with Part A included, I would like this table to be updated automatically. So when next time I open "Part A" drawing it will have A4 assy on the list.

is it possible to make?

SolidworksDrawings And Detailing
Answers 8
SF
SF 2017-08-30 Best Answer

Currently there is no 'easy' way to create this sort of table in a drawing, as in a function within SolidWorks that will do this automatically. You may however find that someone has found a workaround for this, some applications in SolidWorks do create where used list.

VU
VU 2017-08-30

As far as I remember Microsoft GP has such functionality, but of course it is outside of SW.

SF
SF 2017-08-30

Thanks

AT
AT 2017-08-30

Hello Lukasz,

Not sure if this is going to be of some help to you, however, if this assembly has configurations, you can use top level assembly B.O.M. and turn on configurations tab underneath it. From there, you can compare and contrast parts in the top level assemblies.  However, this is only tied to one assembly with configurations, not across the entire platform.

Alen

comment imagecomment imagecomment imagecomment image
DP
DP 2017-08-30

I don't think that this is possible without a macro that would have to be run every time the part is added to another assembly.

I racked my brain, but there really isn't a link going from the assembly to the part....only from the part to the assembly.'

Maybe someone smarter than me would know a way though.

KL
KL 2017-08-30
... there really isn't a link going from the assembly to the part....only from the part to the assembly.'

​ I may be misinterpreting what you are saying, but I believe you have that the wrong way round.

An assy will have links to its component parts, but parts won't have links to any assy it's a component of.

DP
DP 2017-08-30
<p>Kelvin Lamport wrote:</p><p></p><blockquote class="jive-quote">... there really isn't a link going from the assembly to the part....only from the part to the assembly.'</blockquote><p><a _jive_internal="true" data-containerid="-1" data-containertype="-1" data-objectid="153414" data-objecttype="3" href="https://forum.solidworks.com/people/1-1JKQ4MN" data-community-id="1">Dan Pihlaja</a> I may be misinterpreting what you are saying, but I believe you have that the wrong way round.</p><p>An assy will have links to its component parts, but parts won't have links to any assy it's a component of.</p>

I think that we are saying the same thing.   I was thinking more of "pushing" links.....while you are thinking of "pulling" links.

I think that maybe your description is more accurate. 

SF
SF 2017-08-31

Thanks everyone I think this gives us the answer.