Off Topic - Dielectric Film

Sorry about the off topic questions but I know there are lots of engineers here with a lot of knowledge...

Do any of you guys know about dielectric film? I am not finding anything via a Google search that leads me to a purchasable product.

I have an application that requires a dielectric film with the following specs.

1 inch wide

At least 0.7mm thick

UL approved, with dielectric strength of at least 1240VAC

Moisture resistant properties.

I don't have any real knowledge of what this looks like and what the strength ratings mean, only that we need to meet them.

Can you point me in the right direction.

SolidworksGeneral
Answers 13
PR
PR 2018-01-29 Best Answer

I will take no credit for this one.

I called an electrical guy who contracts for us and he sent me to this site. (My knowledge of di-electric is I grease my connections for my plow and trailers etc., that is where I stop.)

http://emipapers.com/specialty-paper-products/electrical-insulation-fish-paper/?gclid=CjwKCAiAqbvTBRAPEiwANEkyCIw3au65xVwEMwa47RICOsklSM7Mr4Z0VepLCDs_r56hWAVc065KTRoCYfcQAvD_BwE

Whether or not they would fit your requirements I am not sure. It looks like the thinnest material they have is .050" (1.27 MM). Hope it helps.

As far as the rest of the specs contacting them directly I am sure they would be able to answer the rest of the value questions you have.

TB
TB 2018-01-29

I don't know if this would even be in the ballpark, but it might be worth taking a look.

275447-1 TE Connectivity Raychem Cable Protection | Tapes, Adhesives, Materials | DigiKey

I would be lucky to fill a thimble with my knowledge of dielectrics, I normally see it as a ceramic or a paste.

Digi-Key and Mouser are two of my favorite websites for all things electrical.

todd

DL
DL 2018-01-29

What's the application? Raychem heat shrink with adhesive is the gold standard when it comes to creating a waterproof electrical connection.

JS
JS 2018-01-29
DC
DC 2018-01-29

Thank you all for the replies! Such a good forum with terrific people!

Paul, I will be contacting the folks at your link. If they can't supply what we need specifically, I bet they will have the knowledge to give me leads, etc.

Todd, a good lead but I don't think it will do.

Douglas, It is more about the electrical barrier than the waterproofing. It is basically a long barrier between an electrically conductive edge of heated glass and an aluminum extrusion that travels next to it. We could make do without the barrier if we left an air gap of 1/4" but we don't have the real estate in our assembly for that much extra space.

Jim, I would never had thought about Kapton, but I will be checking it out. I recognize the name from the product that I use on the bed of my 3D printer. Who would have thought. :-)

KC
KC 2018-01-29

Hello,

I know someone who works for:

Home | Isovolta AG

I've emailed your OP specs to them.

I'll repost when I've received their reply.

What volume and sizes are you looking for? (They're gonna ask.)

Cheers,

Kevin

KC
KC 2018-01-30

Hello,

My source informs me your thickness requirement is greater than what they offer.

Cheers,

Kevin

DC
DC 2018-01-30

Thank for checking Kevin.

DN
DN 2018-01-30

All light sockets with grease tractor and car for me.  Never used a tape sounds interesting.

PR
PR 2018-01-30

I've never used the tape either. I thought after reading about it that it is interesting too. I probably would never have a need for it though.

DN
DN 2018-01-30

May want to contact 3M  they have some but it may be too thick.

DP
DP 2018-02-02

We coat our Cathodes for our ECM (Deburr) project with an acrylic coating called FuturaGen (it is a dental coating).

It is a great insulator and cures hard enough that you can machine it without sacrificing the integrity of the coating.  It also stands up to salt water (which not a lot of coatings will do).

If you are interested, PM me and I can tell you where we bought ours from.

Our coatings are generally about .3mm thick, but you could easily get thicker than that, especially if you coat it extra thick, then machine it back (which is what we do).

The only problem that we ran into was the process of coating would produce bubbles.  But we solved that problem by changing our process.

DC
DC 2018-02-02

Thanks Dan. I am not sure that would be practical for the amounts we would need, but it is an interesting product.

The Kapton people, mentioned earlier, have been very helpful. We are just awaiting samples to arrive. They also supplied a list of distributors who can set us up with the sizes we need.

Thanks again to all who replied!