In the attached part there are 2 display state from a design table.

I'm pretty much trying to show threads on a SHCS.

In the #0-80x0.625 display state, the Cut-Sweep Work fine

but in the second display state(#1-72x01875) The Cut-Sweep shows as an error.

If I change the Second Display state Cut-Sweep properties to "Twist along path" it will work but still conflict with the first display state vise-versa

Can anybody help me with a solution of why the second Display State (#1-72x0.1875) Cut-Sweep Fails being cut along path

or with another type of solution to this.

Thanks