Hi,
I was wondering if it was possibly to mark a part with a property or otherwise so that it would never appear in any BOM when used in an Assy?
Example, We have Mannequin models that we use to portray a scale to customers on all top level drawings, which we exclude from BOMS every time. I have been asked if it is possible to mark this part so that it doesn't ever appear on BOM's as we do not need to call up a mannequin!
Cheers
Andy
SolidworksAssemblies
Hi Andy,
I believe this is a current limitation unfortunately it is not possible to set an option within a part for it to always to be removed automatically from the BOM. I believe the reason for this that it is an option defined within the assembly itself so is something that cant be defined at the part level. I have also checked the Knowledge base and found an enhancement request which has been raised with SOLIDWORKS. enhancement is under SPR 688124.
You can vote for this enhancement by logging into the customer portal Log In | SOLIDWORKS Customer Portal - My Support - Enhancement Requests.
Kind regards
Mark
Thanks Mark,
I suspected this was the case after a brief scan around all the properties and options. Nice to have it confirmed.
Cheers
Andy
That could be a disaster depending on the assembly or company process, if someone checks the wrong box
Hello,
I'm not in front of SW at the moment, but here's a thought to try:
1) Make an mannequin assembly from your mannaquin part (assuming it's not already an assembly),
2) In this assembly, make the part an envelope (in the part's component properties dialog}.
3) Save the assembly.
4) Insert the mannequin assembly (instead of the mannequin part) into your main assembly.
#4 is where I'm not sure if this solves your issue.
I'm hoping the envelope setting is brought into the main assembly because envelopes are automatically excluded from the BOM (and can't added until the envelope check is cleared).
I hope this helps.
Cheers,
Kevin
Another solution similar to Kevin's idea -
1. Put mannequin model as a virtual component in an assembly file.
2. Mark the virtual part component properties "exclude from bom".
3. On the assembly configuration properties, set BOM options to "promote".
This wont show on the BOM.
The mannequin doesn't need to be virtual, but doing it that way will at least eliminate the need to keep track of 2 different files.