I did not start this part, so i need some help on it. I need the top extruded part to be at a different position. It needs to be halfway between plates coming out of the side. So basically i need to move it 45 degrees.
SolidworksParts And Features
I did not start this part, so i need some help on it. I need the top extruded part to be at a different position. It needs to be halfway between plates coming out of the side. So basically i need to move it 45 degrees.
SolidworksParts And Features
just add a new plane that is at 45° from the front plane and move your sketch to that new plane using the "Edit Sketch Plane"
Create a new plane that is at the angle you want the feature and is above the "Revolve1" one feature. Then RMC on "Sketch11" of the Revolve1 feature and select "edit sketch plane" now select the new plane you created.
Thanks.After doing that i got it to the right position, but the bottom of the extrude ( part that comes in contact with the dome) is out of wack. Some hangs over the edge and it isnt flush with the dome like before. Any suggestions on this?
the sketch in your orignal part isn't fully defined so it can move anywhere at the 20° angle. If your original is in the correct location, you'll have to define your centerline better to keep it in that spot. Like a distance from the centerline of the tank to the pierce point of the extrude centerline.
Use "Intersection Curve" to capture the exact curve of the top surface.
If you don't want to start deconstructing someone else's work you could also possibly just use the Move Face feature. Select the temporary axis of the tank as the axis of rotation and all the faces of the neck to move. It says your file is an earlier version so I took some screen shots.
I think this is what you're looking for.
Edit: Instead of selecting faces I just selected Revolve 1 and it all worked out. Thanks!
I don't know what is happening with your Move Face operation, but the inherent problem with the Move Face & Move/Copy Bodies functions, is that it leaves the underlying sketch in it's original location.
I would recommend Troy's suggestion of moving the sketch onto a 45° plane.
Kelvin,
I definitely agree with you. I didn't have time to look through the model David posted but at a glance I would guess that with a properly defined sketch making a new plane and moving the sketch would be about as quick as Move Face or Move Body. And more flexible when other changes are required down the road.
I suggested Move Face as an option when I saw that David said he had not made the part and Paul said that a sketch was underdefined. When you can't or don't want to (don't have time most likely) sort out how a part was made, the assorted Move features provide a viable alternative to editing the existing features.
Sometimes you need, or want, to leave the underlying sketches and features well enough alone. The occasional adventure can be fun, but wading into the uncharted territory of someone else's part can sometimes take you places you wish you hadn't gone.