I am putting a gift together for my brother in law. We are big time Oregon State Beaver fans and thought it would be fun to make him a gift.
So I took the Oregon State Beaver Logo and created a 10 gage sheet metal part out of it. Then sourced some orange translucent acrylic that will be mounted on the back.
What I am going to be doing is sourcing a warm white LED light strip like the following:
That would be mounted around the permiter of the assembly pointing back at the wall that it is hung on.
What I would like to do in solidworks is who a representation of the LED light on back as shown from the front. How would I do this?
I can model up a wall and place the assembly on a wall. I can put a sketch or a part with a face representative of the LED light strip. Could I then put a light source on the sketch or the face of the swept part that I create that would shine towards the wall?
I forgot to mention that I have 10 gage SS sheet available from a recent deisgn I did at work. The acylic is costing my \\\$18 and the LED strips about \\\$50, power supply from the thrift store will run about \\\$2. The guys here at work are going to waterjet cut the two parts for me and weld the standoff's on for me for free. Pretty awsome gift in my book at 24" wide
SolidworksParts And Features
Use an appearance applied to the face of the swept part. There are LED lights available in there that will work well for what you want to do.
Jeff,
So I tried to do what you said. Also turned off the directional lights, put a wall in, and turned down the ambient light but still can't get the lighted face of the LED strip to light up like I want it to. Any suggestions???
Sorry, I should have mentioned that you'll need to use Photoview 360 to see the overall appearance.
Hmmmmm ..... I own Solidworks Proffesional ...... I go to Add-in and make sure that the Photoview 360 is checked. There is a button under the Office Products tab, when I click it nothing happens ........
Not sure what I am doing wrong here .....
Once you've enabled the add-in, you should see a 'Render Tools' tab. Position the part how you want it, then, on the Render Tools tab, select 'Preview Window'. This will do a quick render so you can have an idea what the lighting will look like. You can mess around with the appearances of the other elements in the file to make things more realistic.
There's also a Photoview360 tutorial built into SolidWorks under the tutorials section.