Is there a way or add-in to automatically add marking lines for a router table?

Sorry if this isn't the right place for this question, but we were wondering if there is a way to automatically create "marking lines" (sorry if there's a better term!), to plates in a part/assembly.  An example of this would be you have a base plate and another plate has to be welded to it at 90° somewhere on that base plate, we would like a marking line put on the base plate so when we send the files off to a router place they can cut the pieces and mark those lines so we can line up the plates on them.

Is there a way to do that in Solidworks or is there an add-in that will do that?

Thanks in advance for any help!

Message was edited by: Robyn Beeching

SolidworksParts And Features
Answers 5
CC
CC 2017-03-15 Best Answer

In the assembly, you can add extrude cut which you can opt thru or not thru part

So the line is shown on the assembly but not on the part then you can use if as a ref

comment imagecomment image
RB
RB 2017-07-05

Sorry for taking so long to get back to this, but we can't use that extrude cut on the shapes we have.  I have attached a simple file (to the original post) showing two different shapes and we named one as needing the line markings.  So that piece would need to have line markings on it showing the second piece of plate and then we would flat pattern that shape and send it to our cutting company.  Unfortunately do to the shapes not being flat - extruded cut doesn't work.  Is there anything else we can do?

RS
RS 2017-07-05

Something like this?

comment imagecomment image
RB
RB 2017-07-05

Thanks ​, that definitely works for marking lines.  Unfortunately, it leads to another problem and we can't seem to make the shape with the marked line flatten.  The line is preventing us from selecting the whole sheet as a one to flatten.

PS
PS 2017-07-06

Robyn... one way, create a shtmtl loft and cut.. well, it gets you the flattened scribe.

comment imagecomment image