I'm looking to upgrade all of my company's installs very soon. I just wanted to know, from those who have installed SP2.1, if SW2010 SP2.1 is good to go.
Given the issues with SP1.0 and 2.0, I'm a little bit wary. Mainly, because I have to manage the global installs, and troubleshooting with our team in China will be difficult to say the least. So I need to make this install as issue free as possible.
So... Is 2010 SP2.1 stable?
Thanks in advance for any input.
SolidworksAdministration
I haven't had any problems with it, although I have not had much problems with 2010 at all. If you are unsure how it will perform you should always sat up a test machine first and open copies of everything first to make sure everything will go smoothly. At the same time, if a problem does come up, it is isolated to that one machine and not affecting your productivity if you run into a stopper. I always say the finish is in the prep work.
Chris
We're all running more than the minimum. Most, if not all 64-bit machines (Not sure about my international locations) All running qualified Quadro cards.
Locally, most of our desktops have 4GB RAM, Dual-Core and Quadro 1800 or better cards. The laptops are all 4GB with Quadro cards and dual-core.
Internationally, I only know they beat the minimum specs.
I'm running a test install of 2.0 32-bit on a spare machine. 64 bit is a little harder. No guinea pig machines to spare, and I don't want to overtake my primary with a test install.
I HAD sp 2.1 64 bit on my machine. I uninstalled it to try to regain my design table creation which was lost the minute I installed 2010 sp1.0. This loss was RETROACTIVE to my 2009 sp4.0 64 bit. SP 2.1 did fix my abilty to edit design tables but I still could not create f/scratch in either version. From what I read and am told, the problem is interaction with Excel and the 64 bit SW. The last communication from my VAR was to wait for sp 3. My SPR for the design tables is still pending.
The last thing I did was run "Detect and Repair" from help in Excel 2003 and this has seemed to work at least for the 2009. This fix is mentioned in another thread on here as well as a similar fix for Office 2007.
If you don't want to mess with "repairing" your systems after installing SW, then I recommend waiting for favorable reviews on sp 3. especially if you're going to be using any 64 bit anything.
Oh did I mention that I discovered that my design tables were hosed DURING my CSWP test?
Vista 64 bit
SW 2009 sp 4.0 64 bit
MS Office 2003
Intel core 2 quad Q9400
8gb RAM
NVIDIA QUADRO FX 1800
Brian,
Minus the design table issue (we really don't use those in my company) How was the rest of the install for you?
Unfortunate that the issue came up when it did. Strange disconnect for sure.
Hello,
We had the same design table bug after migrating from SW 2009 SP5.0 to SW 2010 SP2.1. Fortunatly, we were able to fix it using the "Detect and Repair" of MS Office 2003.
- Thanks
Patrick,
If you can I would wait until next month now, should be out with SP3 by the end of April, based on normal releases anway and someone else had mentioned that as well.
Only a couple of quirks, but really nothing earth shattering if you do good installs.
Brian (another one )
I've got SP3.1 installed, and am still getting the 'waiting for excel' error. Grrrrrrrr. I'm running on Win7-64 w/4g ram fwiw.