Hi,
I am quite new to Solidworks and in a process of getting deeper knowledge of the 3D CAD Tool. I am familiar with Autodesk Inventor and been using it for 9 yrs now and quite familiar with the approach on how to do a 3D model.
Now, that I am in a getting to know knowledge with Solidworks. I do have a question, I wanted to do a 3D Model of the Bomber Cage using Solidworks. What wold be the approach that you will do? Is it by the use of Weldment or Swepth?
In inventor I can do this much faster using the Framework Generator. Create few 2D sketch and convert it to 3D sketch as my main guide for create the Framework.
I am attaching an image of the said Bomber Cage and hope that I could get a better pointers on how this can be achieve in Solidworks.
Thank you and appreciate any feedbacks.
Wehlee
SolidworksDrawings And Detailing
I assume you have all the dimensions for this? If so, I would probably attempt to do it as a 3D sketch. If you try to do 2D and convert then to 3D, you will need to create planes to put your 2D sketches on. I would also do it as a weldment; more tools for trimming the tubes.
Let the fun begin!!!!
Hi,
Actually, I already did created a 3D sketch using the inserted images on the Front & Top planes. Then, I use the Projected Curve feature (not sure if that was correct feature though). I do not have the exact dimension or blueprint of the said model.
I did tried both weldment and swepth but found few issues specially on the weldment. I could not attach it in some line/curve entities. And not to mention the familiarity on the Trimmed feature on weldment.
You can't use the weldment feature on splines, so that probably accounts for that issue.
I have no idea what you mean by "And not to mention the familiarity on the Trimmed feature on weldment.."
There is an awesome technique that I picked up from -
Model the body of the car as a solid, start a 3DSketch, select all of the edges, and use "Convert Entities"
Hide the body, and you are left with a fantastic 3DSketch that can be easily tweaked using the features that created the solid body.
Probably one of my favorite "Tips & Tricks" in a long time.
todd
A good one for
Hi Glenn,
What I was referring too is that, I am not yet that familiar on using the TRIM/Extend.
Hi Todd,
I did use that feature/command but, I am not able to apply a weldment on curves/radius entities. Or I am doing something wrong. Let me go through Sal Lama technique.
You may have an issue if some of the curves are splines - I would have to do some testing, because I rarely work with weldments, and when I do, they are usually very simple, straight line models.
As I said above, weldments won't work with splines, but should work with other curves, radii, etc. If it doesn't work for you make sure that the radius isn't too tight for the profile.
Hi Todd,
Noted on the spline curve for not taking weldment.
What I did to make it work was to edit the curves to an arc and it works.