How do I configure angle mates

I am trying to build an assembly where some swing clamps are used in pairs and the clamp element is angled from the centreline by 15°. I have set up two configurations and I am using an angle mate to produce the angular offset. However, no matter how many times I set the angle in the mate properties window to "this configuration only", the angular displacement remains common across all configurations.

I am using Solidworks 2015 SP2.0

Many thanks

Bob

SolidworksAssemblies
Answers 14
DG
DG 2016-01-21 Best Answer

Try doing it for both configurations. Also Have you looked into angle limit mate that can give you the swing effect with one configuration only.

SF
SF 2016-01-21

Thank you for coming back so quickly.

I have tried doing it in both configurations but it seems that the "this configuration only" option is disabled across the piece for angles. I have tried adding a configured distance mate and that works, so my next course of action is to create a design table and try and configure the angle through that. However, I am having trouble adding a design table as SolidWorks says that there are no valid configured features to create a table from. I am just about to do a cold reboot and try again.

I had thought of the angle limit option but I really need two configurations to show the assembly 9a) with component in place and clamped and (b) with out component and ready for loading.

Cheers

Bob

DG
DG 2016-01-21

That seems like a bug.

Do it old school way, double click on the angle mate and then double click on the dimension and edit/set that to "This configuration". Change value as required.

SF
SF 2016-01-21

That works.

Thank you. I thought it was me for a while and I had no idea about the method you just gave me. I will remember that for future use.

Cheers

Bob

BC
BC 2016-03-29

Thank you too. I had the exact same issue. It is obviously a bug, because it works for the distance option right above it! Fortunately the right click works fro angular.

JM
JM 2016-12-06

Thank you Deepak, this also saved me some time configuring angles.

RS
RS 2016-12-06

Using design table helps stabilize buggy configs.

JM
JM 2016-12-06

I think this solution works for generating design tables from mating features.

Today, I was stuck initially with an Off/On suppression option for the angle mate, when I intended for the variable to be set to each configuration. I am not sure if this is a bug or just how Solidworks was intended to be operated. When I edited the configuration of the angle mate in the feature properties (in the box for the angle dimension), it would only generate an option for suppression in design table, even though I specified the configuration to apply the different angles to. So following what Deepak said:

<span style="color: #333333; font-family: Verdana, 'Verdana Ref', Geneva, Tahoma, sans-serif; font-size: 14px; background-color: #f0fade;">double click on the dimension and edit/set that to "This configuration"</span>

After adjusting the angle in the 3D sketch of the mate (instead of the feature tree), when I reloaded the design table, this created the design table "D1" variable, instead of only a suppression off/on option for the mate feature.

LS
LS 2017-02-01

I have the same problem as the OP.  I had this problem in 2016 sp5.0  I still have the same bug in 2017 sp1.0

P.S. I updated this old thread because I found it through google and thought a fellow googler might appreciate the update.

DG
DG 2017-02-02

The SPR #:815483 is still open, so vote for it.

And for the time, use the workaround given above.

DB
DB 2017-02-16

Thanks, Deepak! I always have used the 'old-school' dimension dialog box for this, and I was helping a colleague who uses the property mgr boxes.  Befuddled me... I found your tip & voila, problem solved.  FYI, Still a bug in SW2016SP4.0.  Think I'll check to see if it's fixed in 2017/2018, if the SPR is still there, I'll vote for it.

Cheers!

SP
SP 2017-02-16

You can right click on the dimension after double click on mate, and click configure dimension if you multiple configuration.

comment imagecomment image
KM
KM 2017-03-04

I just went through this this morning and came up with the same results. Then decided to check if anyone had it reported.  SW2017 SP1

How do you vote for an SPR# ?

DG
DG 2017-03-05

Check this post