How can I remove facets from splines

I need to remove the faceting created by the splines, initially it was assumed the CAM software was doing this but a close inspection of the model shows the facets are present in the SW 2010 file. The sketch  with splines appears continuous but after extruding the solid it has faceting.  Any suggestions?

SolidworksSketching
Answers 4
TP
TP 2010-12-22 Best Answer

Right click on the spline and try "Simply Spline"

FF
FF 2010-12-22

No that does not change any thing, just draw a closed spline and extrude it. Make the spline sketch visible then zoom up untill you see the faceting then you can see the sketch outline is true to the sketch(as drawn) but the solid is faceted. When the file is exported to .dxf or parasolid format the faceting follows the export. I have tried IGES, and some others without any luck. I could not find any settings to change in Solidworks for the tolerance so did I miss something?

LB
LB 2010-12-23

it is a graphic setting not what it really looks like, it is a smooth spline. there are also settings in your CAM that can give you facets also, you need to turn up your surface/curve tolerance to get smoother toolpaths...which is more code.

go to options, document proporties, image quality. and slide the sliders to the right. DXF sometimes gives you polyline into your cam...what cam are you running.

have never ever had faceted splines in surfcam!!

comment imagecomment image
SF
SF 2011-01-08

Fred,

Listen to Lenny; what you see on screen is just a graphics representation. What you get out of your CAM must be having issues on the CAM side. Almost all of the geometry of our case parts has been spline driven for the last 7 years. We have never had any problems with facets.

Jerry Steiger