Using SolidWorks 2006, I am using sketch text to place lettering on a part, not by extruding them but leaving their sketch visible. Because sketch text creates a closed loop of double lines for each character (expecting them to be extruded), the letters have gaps in them and do not look very nice when printed. They're supposed to be custom marks laser etched into steel plates, and fixing the image for each item pixel by pixel is not an attractive option. Is there any way to fill in the letters to be solid or sketch them as open single lines?
SolidworksSketching
Right click on the text and select dissolve sketch. Now that text will break down into entities which can be edited as required.
Dylan,
Additonally, after doing the Disolve Text you can Hatch/Fill the letters if required: ( I can't recall if this was available in 2006, but I assume it would be....)
(Flying Fat Fingers result in Exmaple...)
Regards,
Alan
Even after dissolving the text, I can't seem to fill it. The area hatch/fill command will not let me select any sketches in the part, only sketches in the drawing.
Most engravers/milling tools use special characters for text that have to be added in the software for the machine. They are typically a hatch pattern of some sort superimposed on the outline of the text. This would be, by far, the best solution.
If you had to, you could do this same thing in solidworks. Make a hatch pattern (diagonal lines spaced every .002, or whatever the resolution of your machine is), then "power trim" away the exterior. Sounds like a rough way to go to me, though.
Our laser etching machine uses Corel (don't ask me why), so as long as I can export my drawing into a jpeg or tiff with all the pixels in the right places it'll print it nicely. I just don't want to leave sporadic blank spots in my lettering. I'll be sure to take a job in a company with even vaguely compatibly systems in my next life.
There is a solution to your problem here, maybe: https://forum.solidworks.com/message/47755#47755
Tim Warris attached a font that may work well for you, sounds like he has a similar setup.
can you do a split line? you can then add color to the faces it creates or add hatching in drawings. we do a little engraving on some parts and this is how we show it
Charles,
Are we talking apples to apples here?
The exmaple I showed above was in a sketch on a part. (SLDPRT not SLDDRW) which I thought Dylan was asking about.
True, I didn't try doing anything with the sketch besides leaving it as a sketch for the example pics.
SW 2009 Sp5.1
In the picture above, the top "exmaple" is a filled sketch, the bottom "example" is an Exturde Cut.
I am asking for clarity to make sure i understood you correctly.
Thanks,
Alan
well hawt dawg. you are correct, you can fill sketches in a part file.
Dylan, maybe you just aren't in "edit sketch" mode first? You have to be editing the sketch to add the fill.
I know this is old, but anyway to fill in the space between the dissolved text lines and arcs to make them fill in and save as a solid in the dfx file?
Edit: OK I see it under edit>sketch tools >area hatch/fill
What would really be nice to know is if there is a text that is already filled in. I'm trying to use a laser to put some text on a stainless steel part and it needs to be filled in.