External Thread

Can you create an external on a shaft with just thread size or do you have to go in and create a sketch and revolve it?SolidworksParts And Features
Answers 2
CT
CT 2009-12-22 Best Answer
Follow the instruction below, add verify that shaded cosmetic threads filter is on (options). I typically select the OD edge in the model, and then specify the minor diameter. (see here)


Cosmetic Thread PropertyManager (SolidWorks Help Menu)

Specify the following properties when inserting a cosmetic  thread in a part, assembly, or drawing.

Thread Settings

Circular Edges . Select a circular edge in the graphics area.

End Condition. The cosmetic thread extends from the edge selected above to the end condition:

  • Blind. A specified depth. Specify the  depth below.

  • Through. Completely through the  existing geometry.

  • Up to Next. To the next entity that  intercepts the thread.

Depth . Enter a value when the End Condition is Blind.

Minor Diameter, Major Diameter, or Conical Offset . Sets the diameter for the dimension corresponding to  the entity type with the cosmetic thread.

Thread Callout

Type text to appear in the thread callout. (The thread callout appears in  drawing documents only.)

Thread callouts are not used in certain dimensioning standards. If a cosmetic  thread callout is defined in the part or assembly but is not displayed in the  drawing, you can display the callout in the drawing by selecting Insert Callout from the shortcut menu.

AW
AW 2009-12-22

Check out the following thread for a discussion on the subject.  This is in SW2010.

https://forum.solidworks.com/thread/29444

I have a video posted that shows how the feature works and its associated bugs.

Cheers,

Anna