Hi,
I have a multi-body part that I need to export to DXF. It can be either individual DXF for every part, or, more conveniently, one DXF with all parts nested side by side. I will be importing this DXF into free online nesting tool called Nesting Center. That software will take care of proper nesting - all I have to do in SOLIDWORKS is make sure the parts do not overlap in the DXF file, so their outlines be recognized.
Since I have a lot of bodies in my file (52), I needed a convenient way to create a configuration where these parts would be moved away from each other so they don't overlap, before exporting. Exploded View is perfect for this, because it is very quick and convenient to move these bodies away (as opposed to the Move-Copy feature).
Problem is, I cannot seem to find a way to export DXF in this exploded view. I enable the exploded view, go File-Save As, choose DXF, but the resulting DXF shows my part in non-exploded state.
I am attaching the file in question to this post. Can someone advise on the best way to do this?
SolidworksImport/export
Make a drawing from your model and export it to dxf 1:1 ....unless you need 3D geometry data.
You can save out your exploded model to ACIS/*sat format (7 recommended) and import it to AutoCAD with the ascin command.
See the link below...will generate views for multibody part...not exactly the way you are trying to do it but with the same end result.
https://www.solidsolutions.co.uk/solidworks-Services/APPS/Create-Body-Views.aspx
Hello,
I'll suggest anytime "manual" pops into your SW mindset, pause and take the opinion that you're missing something.
It may have to be a manual process, but not necessarily so.
In this case, simply apply the face filter, drag window select across everything and then start the Save As DXF.
The faces option will be selected with all faces selected.
Below is a 250 body part and even on my pokey home laptop, the DXF save from start to finish is seconds,
Kevin
This worked better than expected! I guess I'll stick with this approach. Thanks!
This is a decent way, but I still have to select every face manually... And as I said, there are 52 parts. I don't see how to automate this process.
Hello,
You stated that you couldn't save the exploded view as a DXF. If you select annotation view as the export option, then this is true.
But if you select the Faces/loops/edges option and select the desired faces then the exploded version is exported to DXF:
The empty rectangle sketch is the original location of the narrow rectangle before the explosion.
In Solid Edge 2D (down with DraftSight!), the DXF is in the exploded state:
Kevin
Hello,
I get this when I try to open your file in SW2018 & 2019:
Kevin