Driving 3D model with Complex design table.

I'm tasked with a challenge. We design mostly plastic bottles and are sometimes required to provide the same shape in different volumes. This is not always that simple as we have to consider the center of gravity for tilting and the foot print or base area for stability.

So I need to design 3D bottles in a template or driven by a table that takes the upper and lower limits of these variables into account.

SolidworksGeneral
Answers 2
JM
JM 2010-01-25 Best Answer
You might want to take a look at DriveWorksXpress.
JM
JM 2010-08-27

Have you taken a look at the Design Study feature? I think this might be what you require! You can set up rules for min and max values for the different dimensions. I'm not sure if you can specify that you want a certain weight/capacity etc but if you look into it I'm sure you'll see if its what you require. Likewise I design bottles but for the glass industry, but mostly I work in designing the actual mould equipment. I have spent some time looking at this but I wouldn't be spending enough time designing the actual bottles to justify using it.

Hope this helps!!!!