Drawing templates

Hey All

Quick question about setting up drawing templates and sheet formats. Can I create one drawing template that can scale across all the different sheet sizes? Or do I need to create a template for each size as I am currently doing? We mainly use A4, A3, A2 and A0 here in OZ.

SolidworksGeneral
Answers 6
KL
KL 2009-08-24 Best Answer
One sheet format for each size is required.
EB
EB 2009-08-25
Don't forget, the Sheet Format determines the size.  A Drawing Template can have as many sheets, each with a different size and configuration, as desired/required.  The Sheet Format is easily changed (without changing the views in the sheet) in Sheet Properties.  Make up a Sheet Format, or formats, for each of the sizes you use.  Make Drawing Templates for each sheet size/configuration.  When you start a drawing make your best guess as to the size.  If you decide that you need a bigger or smaller scale, (or a bunch of auxilliary views) go to Sheet Properties and select the Sheet Format you want (change the scale if required while you're there).
SF
SF 2009-08-26
So sheet format is the actual sheet size? And template is the title block and border??
TE
TE 2009-08-26

The Format is the border and titleblock - size specific.

The Template is the above with settings applied and other customizations (notes, tables, preset views)

EB
EB 2009-08-27

The difference between the Drawing Template and the Sheet Format does tend to confuse people.  I have tried before to think of a good analogy to explain it without getting into a lot more detail (and there is a lot of detail) than people really want.  How about this?

Think of the Sheet Format as a piece of paper with the border, title block and other things you want in every drawing.  The drawing views are on a sheet of clear plastic set on top of the Sheet Format.  A Drawing Template can consist of multiple sheets (if you print it, each sheet is a page), each of which has a Sheet Format (paper) and drawing views (clear plastic).  Each drawing sheet can have a different format and you can modify (Edit Sheet Format), or completely replace (menu in Properties), each sheet format independent of the others.

If you decide you need to change the sheet size entirely you simply replace the whole sheet format “paper” with a larger or smaller, one.  Right click on the drawing, away from any views, and select “Properties….” from the menu (below Sheet).  The “Sheet Properties” dialog box should pop up.  You should have a selection of sheet sizes and borders to choose from in “Sheet Format/Size”, the default Solidworks ones if nothing else.  If, for instance, you started with your A4 size drawing, and then decided you needed more room, you could select a bigger size from this menu. Changing the Sheet Format will not change the drawing views you have made. But, if you change the sheet scale, (and the views are set to “Use sheet scale”, as they usually would be) the view scale will, of course, change.

When you are working on the drawing views you cannot change anything on the sheet format (it’s “under” the plastic).  You need to lift up the plastic and “Edit Sheet Format” (Right click and select it from the menu). Then you can modify the border, title block, notes, etc.  Note that you cannot put Drawing Views in the Sheet Format.  RC and select “Edit Sheet” to get back to the drawing views.  If you select “Save Sheet Format…” (in the “File” drop down menu below “Save As…”) you can save the modified format (rename it) for use in other drawing sheets, it will show up on the menu in “Sheet Properties”.  Use “Save As…” in “Save As type:” to save a new version of the complete Drawing Template.

Look in Help, start with “Document Templates” and “Customizing Sheet Formats” for more info. 

EB
EB 2009-08-27
Big type is easy to read, but not what I had in mind.  Sorry about that.  I'll have to double check that in future.