Drawing Template Control of Scale

Is there a way to control the scale in the Drawing Template rather than in the Sheet Format (sheet scale)?  I bring this up because when you change the sheet scale on one sheet, it does not stay the same as on the next sheet.  This is problematic when you use Custom Properties to drive your Title Block.  The "Scale" in the Title Block can be different on different sheets in this case.  This isn't desirable.  Any comments?

SolidworksDrawings And Detailing
Answers 5
JB
JB 2010-09-13 Best Answer

Are you saying that you want all sheets in a drawing to be forced to have the same scale by some setting in the drawing file?  That is not possible.  I'm not sure I get the difficulty with the title block.  Are you saying that you make "scale" a custom property and you manually enter the scale?  Do you not link a note in the sheet format to the sheet scale?

GS
GS 2010-09-13

I think you can accomplish what you want in your Drawing Template by going to Options > System Options > Drawings and un-checking "Automatically scale new drawing views".  If you then set your sheet scale I believe it will remain constant between sheets.

JN
JN 2010-09-13
<p>Josh Brady wrote:</p><p></p><p>Are you saying that you want all sheets in a drawing to be forced to have the same scale by some setting in the drawing file?  </p>

Answer: Here is the issue.  A drawing should have the same scale in the Title Block on all sheets.  Deviations of this are possible but must be documented next to the Drawing View that is different.  SolidWorks does this by default with Section views and Detail Views.

<p>Josh Brady wrote:</p><p></p><p>I'm not sure I get the difficulty with the title block.  Are you saying that you make "scale" a custom property and you manually enter the scale?  Do you not link a note in the sheet format to the sheet scale?</p>

When using SolidWorks Properties to drive myTitle Block, I have the option of using the "Sheet Scale" to fill out "Scale" note.  This allows different sheets to have different scales.  I don't like that.

Scale should not be manually entered in Custom Properties or Notes!  It should be driven by what it actually is in the document/all sheets.

JB
JB 2010-09-13

There is no way in SolidWorks to force every sheet of a drawing to have the same scale.  Admittedly, my experience is limited, but I've never heard of such a requirement before.  Is this part of an internal standard, or is there some other standard (ASME, etc) that requires this?  If so, I would recommend that you submit an ER for this functionality.  As mentioned, you can prevent auto-scaling, but that's about it.

JN
JN 2010-10-06

Sorry its been so long.   I give this a try.