Display states in Sections

OK, so I have a drawing for a basket assembly. The basket is made up with an outer perforated shell and an inner liner, both around the sides and on the bottom. The assembly model is set up with displays where the side and bottom lines can be hidden or unhidden. The drawing starts with a top view and a Section View down through the whole thing.. Then there is another section showing the seam joint. There are also detail views taken from the main section view showing the top and bottom joints. 

What I'd like to do (Actually, what my Boss wants me to do) is have the liners hidden in the main Section view but showing in the detail views. The problem I'm running into is that when I switch the display state in the detail views, the liners are coming in as not sectioned, which covers up anything behind them. On top of that, anything that is sectioned but hidden behind the liners appears as just the cross-hatching..

Any thoughts on how to get things to behave? Other ideas on how to accomplish what I'm trying to do?

I have tried  to attach the files with a pack& go. If it didn't work right, let me know.

I'm using 2019

thanks Much,

Joe

SolidworksDrawings And Detailing
Answers 2
MP
MP 2021-04-08 Best Answer

1-6EBZYO6 wrote:

OK, so I have a drawing for a basket assembly. The basket is made up with an outer perforated shell and an inner liner, both around the sides and on the bottom. The assembly model is set up with displays where the side and bottom lines can be hidden or unhidden. The drawing starts with a top view and a Section View down through the whole thing.. Then there is another section showing the seam joint. There are also detail views taken from the main section view showing the top and bottom joints. 

What I'd like to do (Actually, what my Boss wants me to do) is have the liners hidden in the main Section view but showing in the detail views. The problem I'm running into is that when I switch the display state in the detail views, the liners are coming in as not sectioned, which covers up anything behind them. On top of that, anything that is sectioned but hidden behind the liners appears as just the cross-hatching..

Any thoughts on how to get things to behave? Other ideas on how to accomplish what I'm trying to do?

 

I have tried  to attach the files with a pack& go. If it didn't work right, let me know.

I'm using 2019

 

thanks Much,

Joe

I'm not able to get it to work with Display States or Configurations.  What I found that seems to work is to delete the display state and have everything show in all views.  Now in the Feature Tree in the drawing if I expand out the Section A-A I can right click>Show Hide>Hide Component and hide the parts you mention and they disappear in the section view and all dependent views.

Now if you go into the dependent detail views and right-click and choose Show/Hide>Show Component then the parts will show in the dependent views as you want:

 

Does this do what you need?

comment imagecomment imagecomment imagecomment image
JT
JT 2021-04-08

Thanks Matt,

 You are indeed correct. I did some mucking about with the Right Click Hide/Show a few days ago. I kept thinking that when a component was hidden using that method in one view, it gets hidden in all the views. The trick was in selecting the parent/ child views. If I start with the parent view, then it changes the child views. But if I make the change in the child view, it does not affect the parent view. Now that I understand that, it's a lot easier than trying to use display states.

Actually, the real problem I was running into was that the Liner was not sectioning properly in the detail views when the other parts were behaving. I'm still not entirely sure what's going on there. Maybe it does have something to do with Show/Hide vs. Display states. However, things seem to be happy now, so I ain't gonna mess with it anymore.

Thanks again,

Joe