Hello guys, I´m doing a very simple circular pattern on one part and when I try to make a circular pattern of 3 features SW skips the one on the opposite side of the feature, it appears ok on the preview but then dissapear.
Any Ideas?
SolidworksParts And Features
Check the skip instances box?
is empty
Wierd, can you upload the model.
Tony in this case I can´t upload it. But sure is a strange thing is a very simple pattern around an axis created by front and right plane.
Another strange thing is that it happens with even numbers and and doesen´t happen with odd ones
Be sure to send this file to your VAR. if it is a bug, they can get it reported to SW so it can be fixed.
Cheers,
Anna
It shouldn't make a difference because the math and the preview are correct, but what if you select "equal spacing" and the number of instances?
Thanks guys, I don´t have the time now so I cutted the part and mirrored the correct side and go forward Thanks for your repplies.
Did all that, and the results are the same.
click on the instance to skip. select the point. hit your checkmark. then go back into the command and deselect the point..it might cause the system to reprocess the info.
When you use Circular pattern feature, sometimes the axis line may not at the center of the part,or try to select the round face as your patterrn Axis .
I also get patterns of holes using the hole feature that screw up on odd numbers. It seems to be giving me twice the number of holes that I ask for. Even numbers overlap and so look correct but odd numbers show the double number of holes that I asked for. Given the correct spacing and double the holes... the pattern fully overlaps itself and it looks like the spacing is half what it should be.