Chroming 3D printed parts?

Has anyone had success with chroming 3D printed parts, we have had a couple suppliers quote this & the pricing is very high. We are looking for a production process that could do 100's of small parts

SolidworksGeneral
Answers 15
KC
KC 2021-04-08 Best Answer

do 100's of small parts.

Hello,

Did you inquire as to why their pricing was high (I'm assuming) relative to non 3D parts?

As they assuming there is more prep involved?

Do they not want to do them and instead of saying "no quote", they're pricing to send you to another shop?

Is "100" the lot size or the number of lots? Are the lots small and you're getting hit with multiple lot charges?

Kevin

MP
MP 2021-04-08

This isn't for plastic, but here's the specification we used on a project that recently let for hard-chrome plating (a wearing surface):

Part will be machined to design tolerances then be shipped off and chrome plated according to AMS 2460 Class 2.  Chrome plater shall pre-grind part below finished dimensions by 0.008” to 0.010” prior to chrome plating.  Chrome will be applied in a thickness of 0.008” to 0.010”.  Part will be baked to prevent hydrogen embrittlement.  Part will be grinded and polished to final dimensions as shown on the plans with a minimum chrome thickness of 0.004” and a surface finish of 16 micro inches.    Magnetic inspect part after final grind for cracks.  The inspection report will be sent to the designer.

The rod will be 17-4PH H1150 (we used the ASTM Type 630 H1150 specification).  Because it was stainless, they recommended baking it (Looking at it again, I may need to be more specific about the baking procedure next go around). I don't think that step is necessary if the part isn't stainless.  You may not have to be so specific, if you are working directly with the chrome plating company.  But, we have to deal with lowest bidder, so we need to be very clear and specific.

The company I worked with on that specification was Chromal.

TH
TH 2021-04-08

Good topic, James!

I saw a process where they sprayed something on the plastic substrate first, then rinsed it in water (I think) and it eventually becomes a very shiny chrome surface.  I think it was one of those car restoration shows on TV.  If anyone knows of the process, please post it here.

MJ
MJ 2021-04-08

we have had a couple suppliers quote this & the pricing is very high.

Compared to what? If you've had two people quote the same thing then you're probably getting at least a reasonable quote. Chrome has never been "Cheap" as compared to other more common plating processes but also not typically as expensive as many others. 

Also as has been pointed out there are a whole lot of factors that influence the cost of just about any plating process. I'd ask the people quoting if there is something particular about the parts and how they have to be done that make them "More expensive" than typical.

DN
DN 2021-04-08

Something else to look at but it too is not cheap.  https://alsacorp.com/

FL
FL 2021-04-08

Matt Peneguy wrote:

Maybe they can coat the plastic with a conductive primer or something?

Yes, something like that.

Another way is "vapour".

comment imagecomment image
MP
MP 2021-04-08

David Matula wrote:

i have been wanting to try some of that stuff for years.  Still have not gotten around to it,  not much of a painter of things, since I be color blind.  I did see this epoxy stuff that would give the PLA a nice gloss, and it looked like it did a nice job filling the print lines.  

 

chrome plating is done with an electrical process, so some kind of charge would have to be applied to the parts for the chrome plating to work,  With the paint, i think they could do it cheaper and faster, and the finish would be just as good if not better.  So far I have been quite happy with the parts coming out the color of the print medium.  

I'd agree with you but they are chrome plating plastic by some means and have been for years.  I remember, it may have been 2004 or so, I went to open my car door from the inside and I broke the lever...I thought it was metal. It felt cool to the touch just like metal...But it surely was chrome plated plastic.  I don't know how they do it, and maybe it's that paint you linked to...Otherwise, I don't know how they'd apply it electrically to plastic.  Maybe they can coat the plastic with a conductive primer or something?

DM
DM 2021-04-08

i have been wanting to try some of that stuff for years.  Still have not gotten around to it,  not much of a painter of things, since I be color blind.  I did see this epoxy stuff that would give the PLA a nice gloss, and it looked like it did a nice job filling the print lines.  

chrome plating is done with an electrical process, so some kind of charge would have to be applied to the parts for the chrome plating to work,  With the paint, i think they could do it cheaper and faster, and the finish would be just as good if not better.  So far I have been quite happy with the parts coming out the color of the print medium.  

JS
JS 2021-04-08

 

Check with xometry.com

MP
MP 2021-04-08

David Matula wrote:

take a look at these guys.  

Easy Chrome - The World's Most Exotic Finishes 

Hmm...Never heard of it.  So, that looks more like a decorative coating.  That may be exactly what the OP needs.  They weren't clear as to whether this was a decorative finish or a wearing surface.

DM
DM 2021-04-08

take a look at these guys.  

Easy Chrome - The World's Most Exotic Finishes 

BB
BB 2021-04-08

as a personal interest i would like to know more about this as well.

SY
SY 2021-04-08

The production fee usually is very high for 3D printed part.

There are some 3D print machines in our city local library, the price for plastics (such as ABS, PE,etc.) is about 2$/gram to 5$/gram.

Chroming is another chemical process, ......

Pricing is very high, looks normal.

MP
MP 2021-04-08

Yes, both Kevin and Frederick have some good points. Why are you chrome plating these parts? Is it for appearance only? There are different levels and types of chrome plating...Just like everything else. If it's a wearing surface you want more chrome and a different process than if it's just for appearance... And if it's just for appearance, there may be a paint that may work just as well.

The only time I've looked into it was for a piston rod, and there's several machining processes.. I'm not at work, but if i remember, you machine the part down below the final thickness, send it to the chrome people to have it magically chromed.  They may or may not machine it and there may be more than one iteration of chrome plating, depending on thickness. Then you get it back and machine it to tolerance. I don't remember the price, but it's not cheap.

Just as an aside, a cylinder manufacturer sold us on a laser applied coating (which is even more expensive) for some of our cylinders that operate in a saltwater environment...It doubled the cost of the cylinders. The very next project was in a freshwater environment.. I went with chrome and the sales guy called my boss... My PE stamp was on both the plan sheet and the submittals... He had my number and email address. Interesting sales approach... 

FL
FL 2021-04-08

What is the 3D print process?  FDM? SLA?

Material?  ABS?  Metal?

In general, 3D don't give a smooth surface.  There will be lots of filling up.