Centre crosshairs for polygons

G'day all. Is there a way that SW can be tuned/set up to interpret a regular polygon (squares and hexagons) as a uniform symmetrical shape, just like a circle, in order to be able to determine the centre of the shape in order to place a centre crosshair on it? We use hexagonal nutserts on our assemblies and when there is a multitude of them having to use the Centerline feature to draw  the crosshair by selecting opposite flats (repeated twice to generate a horizontal and vertical line) is a real pain in the....  Plus there is the added task of trimming the generated centrelines to a more suitably appropriate length. Why can't this be an automatic generation simliar to just selecting Center Mark and selecting the circle boundary? Can anyone advise if what l'm asking is possible? Many thanks. 

Answers 4
KC
KC 2026-11-17

For enhancement requests, such as this post, they are best made in the ER forum.
In here, such wishes soon slide, unfulfilled, into the Great Abyss.
See also this related ER post.

JB
JB 2026-11-17

Just for curiosity sake... How would you feel about having a circumscribed circle shown around the polygon?  Like this:
 

comment imagecomment image
JS
JS 2026-11-17

You can show the polygon sketch and then select the inscribed or circumscribed circle for the center mark.

KC
KC 2026-11-18

You can create the inscribed diameter as a Hole Wizard regular hole.
Then, at one of these holes, create a cut for one square/hexagon.
Show the first sketch of the HW op and use it for a Sketch Pattern of the one cut square/hex.
Create a configuration that suppresses the cut and sketch pattern.
In your drawing view, select the no cut config so that only the HW holes display and add your center marks.
After switch back to the cut/pattern config.
Down side is that the CMs will be dangling.
  

comment imagecomment imagecomment imagecomment imagecomment imagecomment imagecomment imagecomment imagecomment imagecomment image