Cannot select components in drawing to dimension

Hi there,

I have an assembly of a pipe route with various valves and other inline components. I have made a drawing from the assembly and used the break command in order for it to fit better in the drawing sheet. When I come to dimension valve positions I am unable to select certain parts. Other parts are fine, I can apply centre lines, centre marks and dimensions with no problem.

I think the break command has confused the drawing. When I select a part in the feature tree a faint box appears in the drawing view where the part is. The parts which are fine have the box around them. The other parts do not, instead the faint box is drawn in what looks like the position it would be had I not used the break command.

Has anyone ever experience this issue and solved it? I don't really want to have to start the drawing again as I having been working on it the last 2 hours. So if anyone can save me it would be very much appreciated.

Thanks

Matt

SolidworksDrawings And Detailing
Answers 5
GS
GS 2015-09-14 Best Answer

I haven't seen that before, and don't remember anyone else posting here about it.  If no one else here has any insight you might want to get your VAR involved.  In the meantime, since you think it's related to the break, you might try deleting the break until you've placed all your dimensions, then re-breaking the view.

SF
SF 2015-09-14

Hi Glenn,

I have just tried it with the break lines deleted  - works fine!

I am a bit surprised Solidworks can't figure out what to do once the break command is applied, oh well will know for next time.

Thanks for your help.

CS
CS 2015-09-14

Seen this and similar things many times.

Two potential solutions:

  1. Close drawing and re-open drawing to restore functionality. (Save First!)
  2. Close SW & re-open, then re-open the drawing.

Also, double-check your selection filters to make sure those didn't inadvertently get turned on.

PM
PM 2015-11-05

Run into this quite often.

Unbreak your view, add all your dimensions, reapply the break.

What is fun is when dimensions disappear on a broken view and when you unbreak it they reappear.

KL
KL 2015-11-05

Matthew, Charles & Patrick,

Which SW version are you running and what are your system specs?

Have you run the SolidWorks Rx > Diagnostics tool?