If I get this Message while I'm Running a Study on a Transmission Tower and during the Progress, it gives a message that body is not stable, how I can Manage to know the point which it's not stable at and try to solve it? can anyone help me how to know that?
SolidworksSimulation
Hi try activate inertiel relief
http://help.solidworks.com/2019/english/SolidWorks/cworks/c_Use_Inertial_Relief.htm?verRedirect=1
Make sur to read the help, because this option could cause inaccurate result, but you'll be able to see the rigid body motion and modify your model accordingly.
Thanks A lot
Hi Sherif,
This is a common question that comes up a lot on this forum. You will be able to track down the instability by going through this process on your study:
1. Go into the study 'Properties'
Turn on 'Use soft springs to stabilize model'
Turn off 'Compute free body forces'
Turn off 'Large displacement mode'
Set the solver to 'Automatic'
2. Suppress all loads and apply only 'Gravity'
3. Mesh/Run the study
4. When the solver stops (if it stops) due to large displacements and prompts to put the study into 'Large Displacement mode' declined this offer. The solver will dump what results it has so far
5. Inspect the displacement plot in the results to find the unrestrained body
The displacement plot may itself need to be edited to disable the deformation scale as an object undergoing rigid body motion might not be visible with that turned on. Any bodies shown in red on the displacement plot are likely candidates for having a rigid body motion that needs to be connected/fixed to the rest of the structure.