2 variants of a part, with linked dimenions?

Hi,

I was wondering if this is possible: I have a part which I want to copy and I want some slot cutout dimensions from the original part to be linked to the same slot cutout dimensions on the new part, so that if the original part is updated, those linked dimensions update on the copied part.  Kind of like how it works if you mirror a part, the mirrored part will update if you update the original.  I want to do it this way (and not configurations) so that i have 2 separate part numbers (and file names).

Thanks for your help!

Dana

SolidworksParts And Features
Answers 4
MK
MK 2009-07-16 Best Answer
How about driving both parts from an assembly sketch?  Insert both parts into an assembly, and control the features you want to be the same on both parts with an assembly sketch.  I believe if you search 'layout sketch' or 'skeleton' in the help it may give you an answer.
SF
SF 2009-07-16

You could also create a library feature of the slot.  After you have created the feature in a part and saved it, insert it into your two files with "link to library part" selected.  If you need to change the slot select "edit in context."  If both parts have the sketch dimensions in common, but you want independent control over the feature dimension, you could use a block instead of a library feature.  After you've saved it, insert it the same way by selecting the check box "linked to file."  Make your sketch changes to the block file.  A benefit to the recommendation above (sharing an assembly) compared to mine is if you use SW Explorer, the relation will show in the "where used/references" information.  The library feature and block will not (I've heard they do in SW PDM).

JM
JM 2009-07-16
Dana, hi. I attached an example of the sketch assembly. This is one way  - my prefered (easiest to understand/explain to others.) Does this get you what you're looking for?
SF
SF 2009-07-21
Sorry for the late reply, thanks to all for ideas on how to do this.  Turns out I overlooked the obvious, the part was symmetrical about the right plane so I simply took a mirror of the part and that worked for me, because the new part was the same as the original part but with a flange cut off.  So taking a mirror meant the slot dimensions stayed linked to the original part.