Hi all

i was performing 2D asymmetric analysis of rim mounting on tire.

i was using hybrid elements and the following error is appearing. 

 MAX. PENETRATION ERROR 265.670E-03   AT NODE 50327 OF CONTACT PAIR    (CARCASS-1_CONTACT,RIM-1_CONTACT)    MAX. CONTACT FORCE ERROR 7.46319E+03 AT NODE 10327 OF CONTACT PAIR    (CARCASS-1_CONTACT,RIM-1_CONTACT)           PENETRATION ERROR TOO LARGE COMPARED TO DISPLACEMENT INCREMENT.

 AVERAGE FORCE                      2.005E+03   TIME AVG. FORCE       2.005E+03  LARGEST RESIDUAL FORCE             1.672E+06   AT NODE     390905   DOF  3  LARGEST INCREMENT OF DISP.          7.98       AT NODE     200600   DOF  3  LARGEST CORRECTION TO DISP.         7.98       AT NODE     200600   DOF  3           FORCE     EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.

 AVERAGE MOMENT                     5.771E+05   TIME AVG. MOMENT      5.771E+05  ALL MOMENT    RESIDUALS ARE ZERO  LARGEST INCREMENT OF ROTATION      3.882E-31   AT NODE        303   DOF  5  LARGEST CORRECTION TO ROTATION     3.882E-31   AT NODE        303   DOF  5           THE MOMENT    EQUILIBRIUM EQUATIONS HAVE CONVERGED

 COMPATIBILITY ERRORS:     TYPE                NUMBER EXCEEDING TOLERANCE  MAXIMUM ERROR        IN ELEMENT  VOLUMETRIC                      49117               -5.251E-02             251468

  NUMBER OF EQUATIONS =   200866     NUMBER OF FLOATING PT. OPERATIONS =  1.14E+12

 Any kind of suggestions would be helpful.