We use DraftSight to create electrical wiring diagrams. Our lines are always spaced by 0.2000.   The grid is set to 0.2000 and the snap to 0.0500.

In AutoCAD LT, we used a grid spacing on 0.2000.  For the text, we were using ROMANS with a height of 0.1235.  When we entered Dtext or DT, the vertical spacing of each line of text would match the grid spacing. 

In DraftSight V1R5 x 64, I have tried numerous settings, including text height and changing the Active TextStyle.  By the time I enter to the third line of text, the text will no longer align to the grid.  Can anyone help with this?

Example.  Command Line: Type dtext or DT

SIMPLENOTE

Active TextStyle: "Standard" Text height: 0.1235

Specify start position: J (for justify)

Specify Option: MC (for middle center)

Specify position: Click on the grid for the start position.

Specify Height:  Enter (default is already set to 0.1235, I have changed this to various values)

Specify Text Angle: Enter (default is already set to 0)

Type text Enter

Type second line of text, etc.

Line 1  Starting point on the grid

Line 2  Is properly spaced vertically to grid spacing of 0.2000

Line 3  Starts to be less that the grid spacing, and decreases with every line entered.