A strain is repeatedly applied to a system along a specific axis and molecular dynamics is run between each strain. The stress is averaged from the last half of the dynamics calculation and the strain, mean stress and standard deviation are written out to a study table.
The cool thing I like about this script is that it is very general and can be used by Forcite or Mesocite. At the start of the script, you specify which module you want to use and specify the forcefield amongst other settings.
Modules Used: Materials Visualizer, Forcite or Mesocite
Version: Materials Studio 5.0
Have fun!
Cheers
Stephen

Dear Stephen,
I am very interested in the script, but curious about the system that this ca be applied to. Is it possible to study a system of polycrystalline aggregate using this script? If so, is there a tool to set-up such a system in M Studio (I have never used forcite or mesocite).
Thanks.
Leo
Hi Leo,
I am not an expert on polycrystalline aggregates but I would think this would be a hard simulation to both set up and to run with Materials Studio.
The system sizes that you would need to study would be too large to study atomistically. This leaves coarse-grained molecular dynamics simulations and even these would not get to the right system size.
In reality, to study systems like this, you should probably use a finite element approach.
I am very open to other views on this tho'.
Cheers
Stephen
Hi Stephen,
is this method tought for glassy polymer system under PBC like the Theodorou and Suter's? You think that it could give good results also for rubbery system with high amount of water in it (25-75%)?
regards,
Alessandro
Dear Stephen,
Thanks for the explanation, and I can envision what the challenges are now. My second thought is that maybe I can use the script to derive the stress-strain relationship along necessary axzes/directions so as to obtain the elastic constants, and then use the VRH scheme to obtain the bulk properties(e.g., bulk modulus and shear modulus) for polycrystalline aggregate. Can I use CASTEP instead of Forcite for this script?
Thanks.
Leo
Dear Stephen,
Thank you for the script. I have made a polymer model with random chains by using a Matlab code. It is not a crystal. I need to find stress in each strain in the Forcite Plus modules. I am going to use Virial stress method. My problem is that, I need net dynamic forces between one atom and each atom around it. It seems, the current force in the material studio is total forces that effect on the atom by vicinity atoms around it. Do you have any idea to calculate forces?
Kind Regards
Saeed
I don't know how suitable it would be for such a system. I developed this to help me validate whether the cross-linked structures that I was creating were periodic across all boundaries but I do know that customers are using this methodology for a wide variety of systems.
Cheers
Stephen
Dear Stephen.
I want to use this sript for my cnt model,but I find the volume of cnt is changing when applied by this script. Could you explain why it occur. Thank you.
Hi Stephen,
I have read your script and I am wondering that which kind of materials and model configuration can this script be applied for ?
Can I use this script to present the stress-strain curve of Fe with initial hexagonal shape ? In your sub-program calculating compression, the new stretched lengths (lateral lattice parameters ) are equal. It will not correct if the initial configuration is hexagonal shape which it's stretched lengths will be propagated with Poisson ratio in each lateral directions. If the initial configuration of the model is cubic shape, and the material is isometric, as the result, the stretched lengths in lateral directions will equal as same as your compressing algorithm. But for the case of configuration of the model is hexagonal shape, I think it should be different.
How do you think about it ? If I have any misunderstanding, please let me know !
I am waiting your reply, nice to hear from you soon !
Thi
Hi Stephen,
I have the same problem as Thi does. Moreover, when I run the script for the crystal that I modeled, the stresses at the very begining (equillibrium) are not starting at 0 and they (X,Y and Z) have some larger values of like 3 GPa. I would appreciate if you could help me in this regard.
I am looking forward to hearing from you.
Thanks,
Shahin
Hi Stephen
I have a doubt here that how to be confirm about the equilibration of the system in the script, and how to determine the sufficient number of dynamics steps and type of dynamics to be run to equilibrate the system sufficiently.
can we incorporate the geometry optimization with the dynamics run and NPT run to make the system at room temperature and pressure, and if yes then what changes should be made and how.
Also, I am also facing the same problem as Shahin about the initial equilibrium stress not being zero or near to zero.
I will be highly thankful for any help.
Looking forward for your responce
Regards
Kishore
Hi Stephen
I have a doubt here that how to be confirm about the equilibration of the system in the script, and how to determine the sufficient number of dynamics steps and type of dynamics to be run to equilibrate the system sufficiently.
can we incorporate the geometry optimization with the dynamics run and NPT run to make the system at some specific temperature and pressure, and if yes then what changes should be made and how.
Also, I am also facing the same problem as Shahin about the initial equilibrium stress not being zero or near to zero.
I will be highly thankful for any help.
Looking forward for your responce
Regards
Kishore
Dear Stephen,
'No' "
I'm very interested this script. but I have a question.
in this script, I want to set up a forcefield of atomic manually. (AssignForcefieldTypes => "No",)<
I am waiting your reply, nice to hear from you soon !
Thanks,
CHANY