1) Open the assembly with SolidWorks. 2) Select File/Find Referencies.. from the menu. 3) Klick Copy fíles... 4) Select No (Preserve directory structure?) 5) Create and select a folder to save the files in and click OK. 6) Close SolidWorks and open SolidWorks explorer. 7) Open the newly saved assembly. 8) Start from the bottom in the part-list. Expand eventualsub-assemblies. Right-click on the part and select Rename. 9) Enter the new name and click Find Now and then click Apply.
Repeat point 9 for all parts and sub-assemblies in the tree.
SF
SF2006-12-20
launch solidworks explorer 2007. in the upper pane, find your top assembly. right click it->click the pack and go icon in the dialog set the destination folder click the select/replace button in the dialog set the replacement string to *.sldprt set the replace text with string to .sldprt click ok, click ok Should have a duplicate of the assembly and references with a new suffix for each filename.
DK
DK2007-01-08
ok...if you want to copy the file and still keep yourdirectory structure (all this will do is not copy all of thetoolbox items and other items that you share outside of the toollike "referenced items").
1. open solidworks explorer 2. open assembly file 3. right click on file name in left hand side of screen 4. select copy 5. in the new screen, check the "Copy Children" box 6. Change the "folder" location 7. go through the checked boxes and deselect any component youdon't want copied (referenced parts, toolbox items, etc.) 8. change your rev if necessary (if you don't want a REV then leaveit blank, you will need to update the file names anyways, so it'susually just easier to leave it there) 9. hit the "APPLY" button. 10. you now have the files copied, now you need to rename them. insolidworks explorer open the new assembly (the one with the revafter it). 11. right click on the assembly name and hit rename. rename thefile to what you want. 12. select the find where used box 13. hit apply. this will update all of your links throughout theentire assembly. 14. keep the assembly shown in solidworks explorer and go throughthe rest of the files under the assembly and rename them. repeatsteps 11 through 13 for EVERY file that you copied.
this is a little time consuming. but it is the correct way to getthings copied without losing all the reference cuts and mates. thiswill keep your assembly and parts ERROR free. hope this helps.
if you are trying to copy everything to send it to a differentperson or to a seperate computer (without sharing toolbox and otheritems). then you will want to use swen's method. i am not on SW2007 yet so i can't tell you if the pack and go works without anyflaws. but we use the method above almost every day. if you havesimilar assemblies and want to change little things in them this isthe way to go. i hope this helps.
2) Select File/Find Referencies.. from the menu.
3) Klick Copy fíles...
4) Select No (Preserve directory structure?)
5) Create and select a folder to save the files in and click OK.
6) Close SolidWorks and open SolidWorks explorer.
7) Open the newly saved assembly.
8) Start from the bottom in the part-list. Expand eventualsub-assemblies. Right-click on the part and select Rename.
9) Enter the new name and click Find Now and then click Apply.
Repeat point 9 for all parts and sub-assemblies in the tree.
in the upper pane, find your top assembly.
right click it->click the pack and go icon
in the dialog set the destination folder
click the select/replace button
in the dialog set the replacement string to *.sldprt
set the replace text with string to .sldprt
click ok, click ok
Should have a duplicate of the assembly and references with a new suffix for each filename.
1. open solidworks explorer
2. open assembly file
3. right click on file name in left hand side of screen
4. select copy
5. in the new screen, check the "Copy Children" box
6. Change the "folder" location
7. go through the checked boxes and deselect any component youdon't want copied (referenced parts, toolbox items, etc.)
8. change your rev if necessary (if you don't want a REV then leaveit blank, you will need to update the file names anyways, so it'susually just easier to leave it there)
9. hit the "APPLY" button.
10. you now have the files copied, now you need to rename them. insolidworks explorer open the new assembly (the one with the revafter it).
11. right click on the assembly name and hit rename. rename thefile to what you want.
12. select the find where used box
13. hit apply. this will update all of your links throughout theentire assembly.
14. keep the assembly shown in solidworks explorer and go throughthe rest of the files under the assembly and rename them. repeatsteps 11 through 13 for EVERY file that you copied.
this is a little time consuming. but it is the correct way to getthings copied without losing all the reference cuts and mates. thiswill keep your assembly and parts ERROR free.
hope this helps.
if you are trying to copy everything to send it to a differentperson or to a seperate computer (without sharing toolbox and otheritems). then you will want to use swen's method. i am not on SW2007 yet so i can't tell you if the pack and go works without anyflaws. but we use the method above almost every day. if you havesimilar assemblies and want to change little things in them this isthe way to go.
i hope this helps.