Is it possible to create a surface from sketch points, atable of XYZ locations or an equation? ThanksSolidworksSurfacing
Comments7
CC
CC2009-02-20
maybe. what you probably want is the "Scan to 3D" featurethat comes with SW Premium.
If it is only a few points, define the boundary with a sketch(maybe a 3d sketch spline), and then you can use the points as a"constraint curve".
how many points? what are you trying to create?
SF
SF2009-02-20
Programs outside of SW can take an equation convert it into aNURBS surface and then export it as an IGES. Here is one examplethat requires Matlabhttp://www.mathworks.com/matla...al/fileexchange/12087.Please put in an enhancement request I already have. Rob Stupplebeen
CC
CC2009-02-20
SW 2009 can create curves from equations.
Mahir wrote a macro (that will work in earlier versions) that willeven do full surfaces:
I am sure that I will find a use for it. the only reason I canthink of to create the surface externally is to improve rebuildtimes.
Thanks again.
Rob Stupplebeen
SF
SF2009-02-20
I just thought of a way around the performance issue. Exportthe surface as an IGS and import back in. Since complex geometryyou would not be editing a curve through points directly thereshouldn't be any loss of functionality assuming the boundarysurface is setup the way you want it. Hope this helps.
Rob Stupplebeen
CC
CC2009-02-20
I think you will find that the Solidworks native Parasolid(.x_t) format will give much better results if you want toround-trip export-import a file.
Even better than that, is if you use the Insert>Part tool. Itgoes something like this:
1. Create ComplexPart.sldprt
2. Create new part file (empty) calledModificationsToComplexPart.sldprt
3. In the empty part, use Import>Part... and reference the"ComplexPart.sldprt". Then it will just bring in the geometry. Youget the added benefit that any changes to the original part will bereflected in the second part as well.
RB
RB2009-02-21
If you don't need to have a surface that is parametric, thenI recommend the parasolid version - VERY light and fast.
But since you lose some of the foundation parametrics, you have toknow that it is firmly designed (no changes) or you have to use itin such a way that changes don't mess with things up or downstream.
I often create a complex part with a "Parasolid", "Assembly Model"or a "Defeatured" configuration for downstream use - preferablyafter the design is completed. Simply save the part off asdescribed above, suppress the features and "Import Geometry" (atool button that you can add through the Customize menu)...
I have used the other option Charles mentions with mostly goodresults too.
If it is only a few points, define the boundary with a sketch(maybe a 3d sketch spline), and then you can use the points as a"constraint curve".
how many points? what are you trying to create?
Rob Stupplebeen
Mahir wrote a macro (that will work in earlier versions) that willeven do full surfaces:
http://forum.solidworks.com/fo...catid=11&threadid=6253
Thanks for the link
Mahir Abrahim,
Thanks for the code
I am sure that I will find a use for it. the only reason I canthink of to create the surface externally is to improve rebuildtimes.
Thanks again.
Rob Stupplebeen
Rob Stupplebeen
Even better than that, is if you use the Insert>Part tool. Itgoes something like this:
1. Create ComplexPart.sldprt
2. Create new part file (empty) calledModificationsToComplexPart.sldprt
3. In the empty part, use Import>Part... and reference the"ComplexPart.sldprt". Then it will just bring in the geometry. Youget the added benefit that any changes to the original part will bereflected in the second part as well.
But since you lose some of the foundation parametrics, you have toknow that it is firmly designed (no changes) or you have to use itin such a way that changes don't mess with things up or downstream.
I often create a complex part with a "Parasolid", "Assembly Model"or a "Defeatured" configuration for downstream use - preferablyafter the design is completed. Simply save the part off asdescribed above, suppress the features and "Import Geometry" (atool button that you can add through the Customize menu)...
I have used the other option Charles mentions with mostly goodresults too.