I have set up a non-linear analysis to simulate a twistingaction on one of our srpings. We took an existing spring andapplied 130 ft-lbs of torque (it rotated about 90 degrees) When Iset up a non-linear anaysis in cosmos and applied the same torqueto a model of the part, it only rotated about 1/3 of the angle...
Can you apply an enforced displacement?
Why are the results so far off... (the scale is set to 1.0)?SolidworksSimulation
Can you apply an enforced displacement?
Why are the results so far off... (the scale is set to 1.0)?SolidworksSimulation