Cosmos Hardware

What hardware i.e. PC Etc do you use and what do you useCosmos for i.e. Single parts, large assemblies etc?
The reason I ask is because we are looking at maybe getting a seatof Cosmos next year and we want to know what sort ofcomputer/software setup is best to get the best from Cosmos.SolidworksSimulation
Comments 5
SF
SF 2008-11-06
I would recommend getting the most RAM you can, and nice fastprocessor. Cosmos will take advantage of multiple cores.

Take a look in the performance categories, there are lots of postsabout spec'ing a computer for solidworks, and what is good forsolidworks is good for cosmos.

As for parts vs. assemblies, it depends on what you are trying tosimulate. If you are only going to simulate single parts, thesystem does not have to be the best. Solution time increasesdrastically when you start to analyze assemblies with contactconditions.

I cannot comment on thermal/frequency/non-linear analysis as I onlydo linear static analysis.

Hope that helps.
RN
RN 2009-01-02
The more the better in my opinion. I run dual quad-coreprocessors (3.16 GHz)and 16GB of ram, and have still had non-linearanalyses run for over 60 hours. Kinda annoying when you spend $15Kon a workstation.
SF
SF 2009-01-12
We are runiing a Dell T7400
2 E5341s (Quad Xeon)& 16G mem
Nvidia 4500

We do siesmic for telecom racks.
This setup does quite well for that
purpose (Random Vibe loaded down rack
simplified parts)

Have another mache that is P4 says Xeon (E3100)
that is quite poor at running these as is my E6750 at home
so the Xeons (real) seem to be the ticket

SW2009 Sim & Flo
CM
CM 2009-01-12
Assuming mechanical simulations run a similar path to CFD, Ijust built an i7 Extreme 3.2GHz box with 12GB for $2700 and it's20% faster than my Quad Core Extreme QX9650 3.0GHz on the exactsame FloWorks simulation (18hrs vs. 22.5hrs). I haven't seenanything to date that shows anything except SPEED, SPEED, SPEED,it's all about GHz.

Simulation solving doesn't utilize multiple processors so don't letIT guys talk you into a slower chip with more cores, you'll regretit.